Skip to content

Bluetooth: hci_bcm: Improve FW load time on CYW55572

Hakan Jansson linux-bluetooth linux-devicetree lkml netdev 2 versions – Applied

Status from this message: This series was applied to bluetooth/bluetooth-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest5 patches 6 repliesApplied 5/5
  2. v14 patches 11 repliesSuperseded

Changes in v2 from the cover letter

- Add patch to tighten DT binding constraints after feedback in:

Patches in v2 All 5 applied

#Subject and filesSizeRepliesApplied
1/5dt-bindings: net: broadcom-bluetooth: Add CYW55572 DT bindingDocumentation/devicetree/bindings/net/broadcom-bluetooth.yaml+1 -02 repliesApplied
2/5dt-bindings: net: broadcom-bluetooth: Add conditional constraintsDocumentation/devicetree/bindings/net/broadcom-bluetooth.yaml+16 -02 repliesApplied
3/5Bluetooth: hci_bcm: Add DT compatible for CYW55572drivers/bluetooth/hci_bcm.c+1 -01 replyApplied
4/5Bluetooth: hci_bcm: Prevent early baudrate setting in autobaud modedrivers/bluetooth/hci_bcm.c+1 -40 repliesApplied
5/5Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud modedrivers/bluetooth/hci_bcm.c+16 -41 replyApplied

Reviews trailers per patch

All 5 patches have a Reviewed-by or Acked-by.

PatchKrzysztof KozlowskiLinus WalleijRob Herring
1/5A-b R-b
2/5R-b R-b
3/5R-b
4/5R-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v2 thread

Cover letter [PATCH v2 0/5] Bluetooth: hci_bcm: Improve FW load time on CYW55572

These patches add an optional device specific data member to specify max baudrate of a device when in autobaud mode. This allows the host to set a first baudrate higher than "init speed" to improve FW load time.

The host baudrate will later be changed to "init speed" (as usual) once FW loading is complete and the device has been reset to begin normal operation.

Changes v1 -> v2:
- Add patch to tighten DT binding constraints after feedback in:

    https://lore.kernel.org/linux-devicetree/[email protected]/
- Add actual baud rates and example FW load time in commit message:
    https://lore.kernel.org/linux-devicetree/[email protected]/

Hakan Jansson (5):
dt-bindings: net: broadcom-bluetooth: Add CYW55572 DT binding
dt-bindings: net: broadcom-bluetooth: Add conditional constraints
Bluetooth: hci_bcm: Add DT compatible for CYW55572
Bluetooth: hci_bcm: Prevent early baudrate setting in autobaud mode
Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud
mode

 .../bindings/net/broadcom-bluetooth.yaml      | 17 +++++++++++++
 drivers/bluetooth/hci_bcm.c                   | 24 +++++++++++++------
 2 files changed, 34 insertions(+), 7 deletions(-)

base-commit: 681ec6abcd7f051f7fc318068a3ac09772ebef7e

Signature · 1 line
2.25.1