arm64: dts: renesas: r8a779g0/white-hawk: Add SDHI/eMMC support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest2 patches 3 repliesIn review
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | arm64: dts: renesas: r8a779g0: Add SDHI nodearch/ | +14 | 1 reply | |
| 2/2 | arm64: dts: renesas: white-hawk-cpu: Add eMMC supportarch/ | +41 | 1 reply |
Reviews trailers per patch
All 2 patches have a Reviewed-by or Acked-by.
| Patch | Wolfram Sang |
|---|---|
| 1/2 | R-b |
| 2/2 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 0/2] arm64: dts: renesas: r8a779g0/white-hawk: Add SDHI/eMMC support
Hi all,
This patch series adds SDHI support for the R-Car V4H SoC, and eMMC support for the White Hawk board.
renesas_sdhi_internal_dmac ee140000.mmc: mmc0 base at 0x00000000ee140000, max clock rate 200 MHz
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 G1M15L 29.6 GiB
mmcblk0boot0: mmc0:0001 G1M15L 31.5 MiB
mmcblk0boot1: mmc0:0001 G1M15L 31.5 MiB
mmcblk0rpmb: mmc0:0001 G1M15L 4.00 MiB, chardev (246:0)The White Hawk CPU board also has a µSD-slot, which is mutually exclusive with the eMMC, and obstructed by a pin header on the BreakOut Board. Hence accessing it requires removing the CPU board, which is a task I haven't undertaken.
I plan to queue these in renesas-devel for v6.2.
Thanks for your comments!
Geert Uytterhoeven (1):
arm64: dts: renesas: r8a779g0: Add SDHI node
Takeshi Kihara (1):
arm64: dts: renesas: white-hawk-cpu: Add eMMC support
.../dts/renesas/r8a779g0-white-hawk-cpu.dtsi | 41 +++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 14 +++++++ 2 files changed, 55 insertions(+)
Signature · 12 lines
2.25.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds