Skip to content

Add QAD, Cti-trigger and Bootconfig support for Data Capture and Compare(DCC)

Souradeep Chowdhury linux-arm-kernel linux-arm-msm linux-devicetree lkml oe-kbuild-all 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v0 Latest1 patch 2 repliesIn review

Patches in v0 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1soc: qcom: dcc: Add QAD, Cti-trigger and Bootconfig support for DCCDocumentation/ABI/testing/debugfs-driver-dcc drivers/soc/qcom/dcc.c+301 -42 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v0 yet.

Read the v0 thread

Cover letter [PATCH V0 0/1] Add QAD, Cti-trigger and Bootconfig support for Data Capture and Compare(DCC)

This patch adds the Bootconfig, QAD and CTI-Trigger support for DCC.

1.Bootconfig

Bootconfig parser has been added to DCC driver so that the register addresses can be configured during boot-time. This is used to debug crashes that can happen during boot-time. The expected format of a bootconfig is as follows:-

dcc_config {
	link_list_0 {
		qcom-curr-link-list = <The list number to configure>
		qcom-link-list =  <Address as same format as dcc separated by '_'>,
	}
}

Example:

dcc_config {
	link_list_0 {
		qcom-curr-link-list = 6
		qcom-link-list = R_0x1781005c_1_apb,
				 R_0x1782005c_1_apb
	}
	link_list_1 {
		qcom-curr-link-list = 5
		qcom-link-list = R_0x1784005c_1_apb
	}
}

2.QAD

QAD can be enabled as a part of debugfs file under each individual list folder. QAD is used to specify the access control for DCC configurations, on enabling it the access control to dcc configuration space is restricted.

3.CTI-trigger

CTI trigger is used to enable the Cross trigger interface for DCC. On enabling CTI trigger the dcc software trigger can be done by writing to CTI trig-out. Also the hwtrigger debugfs file is created which needs to be disabled for enabling CTI-trigger.

Souradeep Chowdhury (1):
soc: qcom: dcc: Add QAD, Ctitrigger and Bootconfig support for DCC

 Documentation/ABI/testing/debugfs-driver-dcc |  24 +++
 drivers/soc/qcom/dcc.c                       | 281 ++++++++++++++++++++++++++-
 2 files changed, 301 insertions(+), 4 deletions(-)

--
2.7.4

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel