Skip to content

Add Data Capture and Compare(DCC) driver to new location

Souradeep Chowdhury linux-arm-kernel linux-arm-msm linux-devicetree lkml llvm oe-kbuild-all 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: misc: qcom,dcc: Add the dtschemaDocumentation/devicetree/bindings/misc/qcom,dcc.yaml+44 -00 replies
2/3drivers: misc: dcc: Add driver support for Data Capture and Compare unit(DCC)drivers/misc/Kconfig drivers/misc/Makefile drivers/misc/dcc.c+1314 -06 replies
3/3MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver supportMAINTAINERS+8 -00 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchRob HerringBjorn AnderssonKrzysztof KozlowskiAlex Elder
1/3R-b R-b R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v1 thread

Cover letter [PATCH V1 0/3] Add Data Capture and Compare(DCC) driver to new location

DCC(Data Capture and Compare) is a DMA engine designed for debugging purposes. In case of a system crash or manual software triggers by the user the DCC hardware stores the value at the register addresses which can be used for debugging purposes. The DCC driver provides the user with debugfs interface to configure the register addresses. The options that the DCC hardware provides include reading from registers, writing to registers, first reading and then writing to registers and looping through the values of the same register.

This patch series is a continuation of the previous series

https://lore.kernel.org/linux-arm-kernel/[email protected]/T/

The dcc driver is moved to a new location drivers/misc along with the binding as per discussions.

Souradeep Chowdhury (3):
dt-bindings: misc: qcom,dcc: Add the dtschema
drivers: misc: dcc: Add driver support for Data Capture and Compare
unit(DCC)
MAINTAINERS: Add the entry for DCC(Data Capture and Compare) driver
support

 .../devicetree/bindings/misc/qcom,dcc.yaml         |   44 +
 MAINTAINERS                                        |    8 +
 drivers/misc/Kconfig                               |    8 +
 drivers/misc/Makefile                              |    1 +
 drivers/misc/dcc.c                                 | 1305 ++++++++++++++++++++
 5 files changed, 1366 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/qcom,dcc.yaml
 create mode 100644 drivers/misc/dcc.c

--
2.7.4