Skip to content

Minor device-tree additions for C.H.I.P

Jonathan McDowell linux-arm-kernel linux-devicetree linux-gpio linux-sunxi lkml oe-kbuild-all 3 versions – Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 5 repliesApplied
  2. v25 patches 10 repliesSuperseded
  3. v13 patches 12 repliesSuperseded

Changes in v3 from the cover letter

- Add Reviewed-By/Acked-Bys
- Drop redundant else
- Switch to GENMASK/decimal values for GPIO3 function defs v2:
- Fix missing ; on bluetooth stanza in DTS
- Add device/host wake GPIOs for Bluetooth device
- Add omit-if-no-ref on the port E pinmux stanza
- Rename axp20x_temp to pmic-temp
- Add AXP209 GPIO3 support

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/5dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schemaDocumentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml+1 -02 replies
2/5pinctrl: axp209: Add support for GPIO3 on the AXP209drivers/pinctrl/pinctrl-axp209.c+42 -02 replies
3/5ARM: dts: sun5i: chip: Enable bluetootharch/arm/boot/dts/sun5i-r8-chip.dts+6 -00 replies
4/5ARM: dts: sun5i: Add port E pinmux settings for mmc2arch/arm/boot/dts/sun5i.dtsi+9 -00 replies
5/5ARM: dts: axp209: Add iio-hwmon node for internal temperaturearch/arm/boot/dts/axp209.dtsi+7 -00 replies

Reviews trailers per patch

All 5 patches have a Reviewed-by or Acked-by.

PatchJernej SkrabecConor DooleyAndy ShevchenkoLinus Walleij
1/5A-b A-b A-b
2/5R-b R-b
3/5A-b
4/5R-b
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v3 thread

Cover letter [PATCH v3 0/5] Minor device-tree additions for C.H.I.P

This small patch series adds some improvements for the C.H.I.P DTS, enabling bluetooth, exporting the PMIC temperature details via iio-hwmon and finally adding the appropriate base pinmux info for an external MMC card. As a pre-requisite for the Bluetooth it also adds support to the AXP209 driver for GPIO3, which is the Bluetooth device wakeup line.

v3:
- Add Reviewed-By/Acked-Bys
- Drop redundant else
- Switch to GENMASK/decimal values for GPIO3 function defs v2:
- Fix missing ; on bluetooth stanza in DTS
- Add device/host wake GPIOs for Bluetooth device
- Add omit-if-no-ref on the port E pinmux stanza
- Rename axp20x_temp to pmic-temp
- Add AXP209 GPIO3 support

Jonathan McDowell (5):
dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema
pinctrl: axp209: Add support for GPIO3 on the AXP209
ARM: dts: sun5i: chip: Enable bluetooth
ARM: dts: sun5i: Add port E pinmux settings for mmc2
ARM: dts: axp209: Add iio-hwmon node for internal temperature

 .../bindings/gpio/x-powers,axp209-gpio.yaml   |  1 +
 arch/arm/boot/dts/axp209.dtsi                 |  7 ++++
 arch/arm/boot/dts/sun5i-r8-chip.dts           |  6 +++
 arch/arm/boot/dts/sun5i.dtsi                  |  9 ++++
 drivers/pinctrl/pinctrl-axp209.c              | 42 +++++++++++++++++++
 5 files changed, 65 insertions(+)
Signature · 1 line
2.39.2