Skip to content

firmware: Add support for boot_stats

Souradeep Chowdhury linux-arm-kernel linux-arm-msm linux-devicetree lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v7 Latest2 patches 8 repliesIn review

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: firmware: bootstats: Add the dtschemaDocumentation/devicetree/bindings/firmware/qcom,bootstats.yaml+38 -06 replies
2/2MAINTAINERS: Add the entry for boot_stats supportMAINTAINERS+6 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v7 yet.

Read the v7 thread

Cover letter [PATCH V7 0/2] firmware: Add support for boot_stats

Qualcomm's proprietary Android boot-loaders capture boot time stats, like the time when the bootloader started execution and at what point the bootloader handed over control to the kernel etc. in the IMEM region. This information is captured by the bootloader and populated on the device tree properties "pre-abl-time" and "abl-time" which can be be viewed from the user space like as follows:-

/sys/firmware/devicetree/base/bootstats # cat abl_time 17898

As a part of this patch series added the bindings for boot-stats which was suggested in the v6 of the series. The link for the same is as follows:-

https://lore.kernel.org/linux-arm-kernel/[email protected]/

Souradeep Chowdhury (2):
dt-bindings: firmware: bootstats: Add the dtschema
MAINTAINERS: Add the entry for boot_stats support

 .../bindings/firmware/qcom,bootstats.yaml     | 38 +++++++++++++++++++
 MAINTAINERS                                   |  6 +++
 2 files changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/qcom,bootstats.yaml

--
2.17.1