Skip to content

Query the RSU SPT table offset to determine RSU page size

[email protected] lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 2 patches 0 repliesNew

changelog v2 from the cover letter

-Update the comment on svc COMMAND_MBOX_SEND_CMD -Update the rsu mailbox cmd ret_val to use already defined ret

Patches in v1 No applies recorded yet

None of the 2 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Query the RSU SPT table offset to determine RSU page size

From: Kah Jing Lee <[email protected]>

Hi,
This patchset is to add the generic mailbox command in the svc driver to enable the rsu driver to query spt address.
SPT0 address - lower range & SPT1 address - upper range address will be queried in order to determine the page size of RSU, whether it is 32kB or 64kB that is supported.

Thanks,
KJ

changelog v2:
-Update the comment on svc COMMAND_MBOX_SEND_CMD -Update the rsu mailbox cmd ret_val to use already defined ret

Radu Bacrau (1):
firmware: stratix10-rsu: query spt addresses

Teh Wen Ping (1):
firmware: stratix10-svc: Generic Mailbox Command

 drivers/firmware/stratix10-rsu.c              | 100 +++++++++++++++++-
 drivers/firmware/stratix10-svc.c              |  18 ++++
 include/linux/firmware/intel/stratix10-smc.h  |  25 +++++
 .../firmware/intel/stratix10-svc-client.h     |   5 +
 4 files changed, 147 insertions(+), 1 deletion(-)

base-commit: 5133c9e51de41bfa902153888e11add3342ede18

Signature · 1 line
2.25.1