Skip to content

scsi: target: iscsi: Fix two protocol issues

[email protected] linux-scsi lkml target-devel 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 8 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2scsi: target: iscsi: handle SCSI immediate commandsdrivers/target/iscsi/iscsi_target.c drivers/target/iscsi/iscsi_target_util.c+11 -115 replies
2/2scsi: target: iscsi: don't warn of R/W when no datadrivers/target/iscsi/iscsi_target.c+3 -22 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchDavid Bond
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] scsi: target: iscsi: Fix two protocol issues

From: Lee Duncan <[email protected]>

Recent boot testing using the fastlinq qedi iSCSI Converged Network Adapter and an LIO target uncovered a couple of issues with the kernel iSCSI target driver. The first patch addresses an issue with the handling of iSCSI "immediate commands", which are allowed but not common, and the second patch lowers the noise level of the driver when initiators send PDUs with the read and/or write bits set but no data, which is also allowed. (See RFC 3720)

Lee Duncan (2):
scsi: target: iscsi: handle SCSI immediate commands
scsi: target: iscsi: don't warn of R/W when no data

 drivers/target/iscsi/iscsi_target.c      | 17 ++++++-----------
 drivers/target/iscsi/iscsi_target_util.c | 10 ++++++++--
 2 files changed, 14 insertions(+), 13 deletions(-)
Signature · 1 line
2.43.0