Skip to content

ALSA: scarlett2: Add support for Vocaster

Geoffrey D. Bennett linux-sound 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest14 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/14ALSA: scarlett2: Move initialisation code lower in the sourcesound/usb/mixer_scarlett2.c+409 -4060 replies
2/14ALSA: scarlett2: Implement handling of the ACK notificationsound/usb/mixer_scarlett2.c+61 -90 replies
3/14ALSA: scarlett2: Add support for reading from flashsound/usb/mixer_scarlett2.c+84 -40 replies
4/14ALSA: scarlett2: Rename gen4_write_addr to param_buf_addrsound/usb/mixer_scarlett2.c+18 -190 replies
5/14ALSA: scarlett2: Add pbuf field to struct scarlett2_configsound/usb/mixer_scarlett2.c+46 -390 replies
6/14ALSA: scarlett2: Add support for config items with size = 32sound/usb/mixer_scarlett2.c+6 -10 replies
7/14ALSA: scarlett2: Add additional input configuration parameterssound/usb/mixer_scarlett2.c+82 -580 replies
8/14ALSA: scarlett2: Define the maximum preamp input gain per-config-setsound/usb/mixer_scarlett2.c+12 -80 replies
9/14ALSA: scarlett2: Define autogain status texts per-config-setsound/usb/mixer_scarlett2.c+25 -70 replies
10/14ALSA: scarlett2: Add input mute controlssound/usb/mixer_scarlett2.c+141 -10 replies
11/14ALSA: scarlett2: Add DSP controlssound/usb/mixer_scarlett2.c+855 -00 replies
12/14ALSA: scarlett2: Add support for Focusrite Vocaster One and Twosound/usb/mixer_quirks.c sound/usb/mixer_scarlett2.c+165 -40 replies
13/14ALSA: scarlett2: Add autogain target controlssound/usb/mixer_scarlett2.c+207 -00 replies
14/14ALSA: scarlett2: Add Bluetooth volume control for Vocaster Twosound/usb/mixer_scarlett2.c+156 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/14] ALSA: scarlett2: Add support for Vocaster

Hi Takashi,

This patch series contains:

1-2: Fix to wait for an ACK from the device after sending a command, before attempting to read the response. This didn't seem to be necessary previously, but with 4th Gen devices it seems to help with a rare issue where the device stops responding.

3: Support for reading flash segments from the device.

4-11: Preparation for Vocaster support.

12: Vocaster One and Two support.

13: Add autogain target controls for 4th Gen and Vocaster.

14: Add Bluetooth volume control for Vocaster Two.

Thanks,
Geoffrey.

Geoffrey D. Bennett (14):
ALSA: scarlett2: Move initialisation code lower in the source
ALSA: scarlett2: Implement handling of the ACK notification
ALSA: scarlett2: Add support for reading from flash
ALSA: scarlett2: Rename gen4_write_addr to param_buf_addr
ALSA: scarlett2: Add pbuf field to struct scarlett2_config
ALSA: scarlett2: Add support for config items with size = 32
ALSA: scarlett2: Add additional input configuration parameters
ALSA: scarlett2: Define the maximum preamp input gain per-config-set
ALSA: scarlett2: Define autogain status texts per-config-set
ALSA: scarlett2: Add input mute controls
ALSA: scarlett2: Add DSP controls
ALSA: scarlett2: Add support for Focusrite Vocaster One and Two
ALSA: scarlett2: Add autogain target controls
ALSA: scarlett2: Add Bluetooth volume control for Vocaster Two

 sound/usb/mixer_quirks.c    |    2 +
 sound/usb/mixer_scarlett2.c | 2757 ++++++++++++++++++++++++++++-------
 2 files changed, 2235 insertions(+), 524 deletions(-)
Signature · 1 line
2.43.0