Skip to content

Misc changes for CSSI boards

Christophe Leroy u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest17 patches 0 repliesNew
  2. v14 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- Added temperature and FPGA support and SPI driver optimisation

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/17board: cssi: Fix MCR3000 board environmentboard/cssi/mcr3000/mcr3000.env+1 -10 replies
2/17board: cssi: Fix SPI nodes in DTSarch/powerpc/dts/cmpc885.dts arch/powerpc/dts/cmpcpro.dts+5 -50 replies
3/17board: cssi: Allow use without HUSH shellboard/cssi/cmpc885/cmpc885.env board/cssi/cmpcpro/cmpcpro.env+4 -40 replies
4/17board: cssi: Initialise port F on MIAEboard/cssi/common/common.c+34 -20 replies
5/17board: cssi: Properly initialise MAC address for fibre on CMPC885 boardboard/cssi/cmpc885/cmpc885.c+3 -10 replies
6/17spi: mpc8xx: Add GPIO dependencydrivers/spi/Kconfig+1 -10 replies
7/17spi: mpc8xx: Fix transfert when input or output buffer is NULLdrivers/spi/mpc8xx_spi.c+7 -30 replies
8/17thermal: Add support for TI LM74drivers/thermal/Kconfig drivers/thermal/Makefile drivers/thermal/ti-lm74.c+59 -00 replies
9/17board: cssi: Add support for SPI bus on MCR3000 boardarch/powerpc/dts/mcr3000.dts board/cssi/mcr3000/Makefile board/cssi/mcr3000/mcr3000.c +2 more+151 -00 replies
10/17board: cssi: add support for reading temperaturearch/powerpc/dts/cmpc885.dts arch/powerpc/dts/cmpcpro.dts arch/powerpc/dts/mcr3000.dts +3 more+37 -20 replies
11/17powerpc: 8xx: Set SDMA configuration register correclyarch/powerpc/cpu/mpc8xx/cpu_init.c drivers/spi/mpc8xx_spi.c+6 -40 replies
12/17spi: mpc8xx: Allow transfer of more than MAX_BUFFER lendrivers/spi/mpc8xx_spi.c+34 -140 replies
13/17spi: mpc8xx: Use 16 bit mode for large transfers with even sizedrivers/spi/mpc8xx_spi.c+41 -30 replies
14/17spi: mpc8xx: Set up speed as requesteddrivers/spi/mpc8xx_spi.c+17 -20 replies
15/17board: cssi: Use HAVE_VENDOR_COMMON_LIB logicboard/cssi/cmpc885/Makefile board/cssi/cmpcpro/Makefile board/cssi/common/Makefile+10 -20 replies
16/17board: cssi: Load FPGA on MCR3000 boardarch/powerpc/dts/mcr3000.dts board/cssi/mcr3000/fpga_code.h board/cssi/mcr3000/mcr3000.c+63 -10 replies
17/17board: cssi: Read and display MCR board addressboard/cssi/common/common.c board/cssi/mcr3000/mcr3000.c+11 -20 replies

Reviews trailers per patch

3 of 17 patches have a Reviewed-by or Acked-by.

PatchDUBOIS HugoCASAUBON Jean Michel
1/17R-b
2/17
3/17
4/17R-b
5/17R-b
6/17
7/17
8/17
9/17
10/17
11/17
12/17
13/17
14/17
15/17
16/17
17/17

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 00/17] Misc changes for CSSI boards

This series contains misc fixes and changes for CSSI boards.

Main changes are:
- Fix and optimise mpc8xx SPI driver
- Add support for LM74 temperature sensor
- Add support for loading FPGA on MCR3000

I will send a pull request later before close of the merge window.

Changes since v1:
- Added temperature and FPGA support and SPI driver optimisation

Christophe Leroy (13):
board: cssi: Fix SPI nodes in DTS
spi: mpc8xx: Add GPIO dependency
spi: mpc8xx: Fix transfert when input or output buffer is NULL
thermal: Add support for TI LM74
board: cssi: Add support for SPI bus on MCR3000 board
board: cssi: add support for reading temperature
powerpc: 8xx: Set SDMA configuration register correcly
spi: mpc8xx: Allow transfer of more than MAX_BUFFER len
spi: mpc8xx: Use 16 bit mode for large transfers with even size
spi: mpc8xx: Set up speed as requested
board: cssi: Use HAVE_VENDOR_COMMON_LIB logic
board: cssi: Load FPGA on MCR3000 board
board: cssi: Read and display MCR board address

Hugo Dubois (2):
board: cssi: Initialise port F on MIAE
board: cssi: Properly initialise MAC address for fibre on CMPC885
board

Jean-Michel CASAUBON (2):
board: cssi: Fix MCR3000 board environment
board: cssi: Allow use without HUSH shell

 arch/powerpc/cpu/mpc8xx/cpu_init.c |   6 ++
 arch/powerpc/dts/cmpc885.dts       |  18 ++++-
 arch/powerpc/dts/cmpcpro.dts       |  16 +++-
 arch/powerpc/dts/mcr3000.dts       |  41 +++++++++++
 board/cssi/cmpc885/Makefile        |   2 +-
 board/cssi/cmpc885/cmpc885.c       |   4 +-
 board/cssi/cmpc885/cmpc885.env     |   4 +-
 board/cssi/cmpcpro/Makefile        |   2 +-
 board/cssi/cmpcpro/cmpcpro.env     |   4 +-
 board/cssi/common/Makefile         |   8 ++
 board/cssi/common/common.c         |  42 ++++++++++-
 board/cssi/mcr3000/Makefile        |   1 +
 board/cssi/mcr3000/fpga_code.h     |  10 +++
 board/cssi/mcr3000/mcr3000.c       |  58 +++++++++++++++
 board/cssi/mcr3000/mcr3000.env     |   2 +-
 board/cssi/mcr3000/mcr3000_gpio.c  | 109 ++++++++++++++++++++++++++++
 configs/CMPC885_defconfig          |   3 +
 configs/CMPCPRO_defconfig          |   3 +
 configs/MCR3000_defconfig          |   8 ++
 drivers/spi/Kconfig                |   2 +-
 drivers/spi/mpc8xx_spi.c           | 113 ++++++++++++++++++++++++-----
 drivers/thermal/Kconfig            |   6 ++
 drivers/thermal/Makefile           |   1 +
 drivers/thermal/ti-lm74.c          |  52 +++++++++++++
 24 files changed, 476 insertions(+), 39 deletions(-)
 create mode 100644 board/cssi/common/Makefile
 create mode 100644 board/cssi/mcr3000/fpga_code.h
 create mode 100644 board/cssi/mcr3000/mcr3000_gpio.c
 create mode 100644 drivers/thermal/ti-lm74.c
Signature · 1 line
2.43.0