Skip to content

Initial u-boot support for raspberrypi5

Tim Orling yocto 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3layer.conf: rpi5 recommends lts-u-boot-mixinconf/layer.conf+3 -00 replies
2/3u-boot: re-enable rapsberrypi5conf/machine/raspberrypi5.conf recipes-bsp/u-boot/u-boot_%.bbappend+2 -30 replies
3/3raspberrypi5.conf: Fix KERNEL_IMAGETYPE_UBOOTconf/machine/raspberrypi5.conf+4 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [meta-raspberrypi][PATCH 0/3] Initial u-boot support for raspberrypi5

Enable u-boot for the raspberrypi5 via the meta-lts-mixins 'scarthgap/u-boot' branch.

This is initial support for raspberrypi5, not all features (usb, ethernet) are enabled in u-boot yet.

You may need to have a UART dongle plugged into the 'UART' port between 'HDMI0' and 'HDMI1' to get the kernel to boot. Your mileage may vary.

The following changes since commit d072cc8a48571a4af40a937f98e173b5c9468c4f:

rpi-base: Add hifiberry-dacplusadc overlay (2024-03-28 03:35:31 +0000)

are available in the Git repository at:

https://github.com/moto-timo/meta-raspberrypi scarthgap/raspberrypi5_u-boot
https://github.com/moto-timo/meta-raspberrypi/tree/scarthgap/raspberrypi5_u-boot

Tim Orling (3):
layer.conf: rpi5 recommends lts-u-boot-mixin
u-boot: re-enable rapsberrypi5
raspberrypi5.conf: Fix KERNEL_IMAGETYPE_UBOOT

 conf/layer.conf                      | 3 +++
 conf/machine/raspberrypi5.conf       | 6 ++++++
 recipes-bsp/u-boot/u-boot_%.bbappend | 3 ---
 3 files changed, 9 insertions(+), 3 deletions(-)
Signature · 1 line
2.43.2