fix CPER issues related to UEFI 2.9A Errata
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest4 patches 1 replyIn review
- v43 patches 9 repliesSuperseded
- v33 patches 0 repliesSuperseded
Changes in v5 from the cover letter
- Do some cleanups and minor fixes as suggested by Jonathan and Tony:
- check errors at strscpy();
- simplify cper_bits_to_str() function;
- use FIELD_GET() and for_each_set_bit();
- use ARRAY_SIZE() on infofx to let it clear that it should be size of newpfx + 1;
- fix kernel-doc warning with W=1;
- use kernel-doc for two exported functions at cper.c.
Patches in v5 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | efi/cper: Adjust infopfx size to accept an extra spacedrivers/ | +1 | 0 replies | |
| 2/4 | efi/cper: Add a new helper function to print bitmasksdrivers/ include/ | +43 | 1 reply | |
| 3/4 | efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specsdrivers/ drivers/ include/ | +38 | 0 replies | |
| 4/4 | docs: efi: add CPER functions to driver-apiDocumentation/ drivers/ | +12 | 0 replies |
Reviews trailers per patch
1 of 4 patches has a Reviewed-by or Acked-by.
| Patch | Jonathan Cameron |
|---|---|
| 1/4 | R-b |
| 2/4 | |
| 3/4 | |
| 4/4 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v5 0/4] fix CPER issues related to UEFI 2.9A Errata
The UEFI 2.9A errata makes clear how ARM processor type encoding should be done: it is meant to be equal to Generic processor, using a bitmask.
The current code assumes, for both generic and ARM processor types that this is an integer, which is an incorrect assumption.
Fix it. While here, also fix a compilation issue when using W=1.
After the change, Kernel will properly decode receiving two errors at the same message, as defined at UEFI spec:
[ 75.282430] Memory failure: 0x5cdfd: recovery action for free buddy page: Recovered
[ 94.973081] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[ 94.973770] {2}[Hardware Error]: event severity: recoverable
[ 94.974334] {2}[Hardware Error]: Error 0, type: recoverable
[ 94.974962] {2}[Hardware Error]: section_type: ARM processor error
[ 94.975586] {2}[Hardware Error]: MIDR: 0x000000000000cd24
[ 94.976202] {2}[Hardware Error]: Multiprocessor Affinity Register (MPIDR): 0x000000000000ab12
[ 94.977011] {2}[Hardware Error]: error affinity level: 2
[ 94.977593] {2}[Hardware Error]: running state: 0x1
[ 94.978135] {2}[Hardware Error]: Power State Coordination Interface state: 4660
[ 94.978884] {2}[Hardware Error]: Error info structure 0:
[ 94.979463] {2}[Hardware Error]: num errors: 3
[ 94.979971] {2}[Hardware Error]: first error captured
[ 94.980523] {2}[Hardware Error]: propagated error captured
[ 94.981110] {2}[Hardware Error]: overflow occurred, error info is incomplete
[ 94.981893] {2}[Hardware Error]: error_type: 0x0006: cache error|TLB error
[ 94.982606] {2}[Hardware Error]: error_info: 0x000000000091000f
[ 94.983249] {2}[Hardware Error]: transaction type: Data Access
[ 94.983891] {2}[Hardware Error]: cache error, operation type: Data write
[ 94.984559] {2}[Hardware Error]: TLB error, operation type: Data write
[ 94.985215] {2}[Hardware Error]: cache level: 2
[ 94.985749] {2}[Hardware Error]: TLB level: 2
[ 94.986277] {2}[Hardware Error]: processor context not corruptedAnd the error code is properly decoded according with table N.17 from UEFI 2.10 spec:
[ 94.981893] {2}[Hardware Error]: error_type: 0x0006: cache error|TLB errorThe error injection logic was checked via QEMU using this patch:
https://lore.kernel.org/all/[email protected]/
v5:
- Do some cleanups and minor fixes as suggested by Jonathan and Tony:
- check errors at strscpy();
- simplify cper_bits_to_str() function;
- use FIELD_GET() and for_each_set_bit();
- use ARRAY_SIZE() on infofx to let it clear that it should be size of newpfx + 1;
- fix kernel-doc warning with W=1;
- use kernel-doc for two exported functions at cper.c.
v4:
- The print function had some bugs on it, which was discovered with the help of an error injection tool I'm now using.
v3:
- It adds a helper function to produce a buffer describing the error bits at cper's printk and ghes pr_warn_bitrated. It also fixes a W=1 error while building cper.
v2:
- It fixes the way printks are handled on both cper_arm and ghes drivers.
v1:
- (tagged as RFC) was mostly to give a heads up that the current implementation is not following the spec. It also touches only cper code.
Mauro Carvalho Chehab (4):
efi/cper: Adjust infopfx size to accept an extra space efi/cper: Add a new helper function to print bitmasks efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs
docs: efi: add CPER functions to driver-api
.../driver-api/firmware/efi/index.rst | 11 ++-- drivers/acpi/apei/ghes.c | 15 +++--- drivers/firmware/efi/cper-arm.c | 52 +++++++++---------- drivers/firmware/efi/cper.c | 41 ++++++++++++++- include/linux/cper.h | 12 +++-- 5 files changed, 89 insertions(+), 42 deletions(-)
Signature · 1 line
2.45.2