Skip to content

TQ-Systems TQMa62xx SoM and MBa62xx board

Matthias Schiffer linux-arm-kernel linux-devicetree linux-hardening lkml 6 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 3 repliesIn review
  2. v42 patches 4 repliesSuperseded
  3. v3 posting 2/22 patches 0 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v3 posting 1/21 patch0 repliesSuperseded
v25 patches14 repliesSuperseded
v15 patches10 repliesSuperseded

Changes in v5 from the cover letter

- Rebase onto latest ti-k3-dts-next

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: arm: ti: Add compatible for AM625-based TQMa62xx SOM family and carrier boardDocumentation/devicetree/bindings/arm/ti/k3.yaml+7 -00 replies
2/2arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board Device Treesarch/arm64/boot/dts/ti/Makefile arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi+1262 -03 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchRob Herring (Arm)
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/2] TQ-Systems TQMa62xx SoM and MBa62xx board

This adds Device Trees for our AM62x-based SoM TQMa62xx and its reference carrier board MBa62xx.

Not yet included are overlays to enable LVDS display output and MIPI-CSI camera input.

Changes in v5:
- Rebase onto latest ti-k3-dts-next

Changes in v4:
- Rebase onto latest ti-k3-dts-next
- Reorder boot phase tags after other standard DT properties
- Add missing supply regulators in SPI-NOR flash and USB hub
- Set status = "okay" in &cpsw3g, as it is disabled in k3-am62-main.dtsi now
- Add disabled 1400MHz OPP entry (will be enabled by bootloader if supported by PMIC configuration)
- Update copyright years in new files

Changes in v3:
- Rebased onto ti-k3-dt-for-v6.18
- 3 of the 5 patches in v2 have been applied already and are dropped
- Include k3-am62-ti-ipc-firmware.dtsi, drop now redundant configuration
- Change node name for MCU reserved memory to 'memory'
- Use rgmii-id PHY mode
- Drop now redundant ti,rx-internal-delay
- Update simple-audio-card,name to match other TQ SOMs with compatible configuration
- Reference dss_pins in dss node (actual display support will be added in a follow-up patch series)
- Consistently use GPIO_ACTIVE_HIGH define
- Drop unneeded usb0 quirk flags
- Add boot phase tags

Changes in v2:
- Collected acks and reviews
- Rebased onto v6.13-rc1

Matthias Schiffer (2):
dt-bindings: arm: ti: Add compatible for AM625-based TQMa62xx SOM
family and carrier board
arm64: dts: ti: Add TQ-Systems TQMa62xx SoM and MBa62xx carrier board
Device Trees

 .../devicetree/bindings/arm/ti/k3.yaml        |   7 +
 arch/arm64/boot/dts/ti/Makefile               |   1 +
 .../boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts | 930 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi | 331 +++++++
 4 files changed, 1269 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-tqma62xx-mba62xx.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am625-tqma62xx.dtsi
Signature · 4 lines
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/