Skip to content

pinctrl: ingenic: add support for x1600 SoC and MII and I2S for jz4730

H. Nikolaus Schaller linux-devicetree linux-gpio linux-mips lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest4 patches 1 replyIn review
  2. v24 patches 4 repliesSuperseded
  3. v14 patches 3 repliesSuperseded

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4bindings: pinctrl: ingenic: add x1600Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml+2 -00 replies
2/4pinctrl: ingenic: add x1600 supportdrivers/pinctrl/pinctrl-ingenic.c+242 -20 replies
3/4pinctrl: ingenic: jz4730: add pinmux for MIIdrivers/pinctrl/pinctrl-ingenic.c+6 -00 replies
4/4pinctrl: ingenic: jz4730: add pinmux for I2S interfacedrivers/pinctrl/pinctrl-ingenic.c+12 -00 replies

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchPaul CercueilAndreas KemnadeH. Nikolaus SchallerConor Dooley
SeriesCo-authored-by Co-authored-by
1/4R-b A-b
2/4R-b Co-authored-by Co-authored-by
3/4R-b
4/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 4 reviewers.

Read the v3 thread

Cover letter [PATCH v3 0/4] pinctrl: ingenic: add support for x1600 SoC and MII and I2S for jz4730

PATCH V3 2025-03-01 11:00:41:
Fix some nits reported by Conor and Paul during their review and add their acked/reviewed-by.

PATCH V2 2025-02-28 14:33:57:
Fix pwm5/pwm6/pwm7 pin groups (each one can be muxed to one of two pads while pwm0-4 have only one pad) for X1600.

PATCH V1 2025-02-26 18:14:53:
This series expands pinctrl support for some Ingenic/Lumissil SoC. For the jz4730 we add MII and I2S pinctrl and general x1600 support.

The x1600 parts were jointly developed.

Code was tested on LX16 board (x1600) and Alpha400 (jz4730) and on CI20 (jz4780).

H. Nikolaus Schaller (3):
bindings: pinctrl: ingenic: add x1600
pinctrl: ingenic: jz4730: add pinmux for MII
pinctrl: ingenic: jz4730: add pinmux for I2S interface

Paul Boddie (1):
pinctrl: ingenic: add x1600 support

 .../bindings/pinctrl/ingenic,pinctrl.yaml     |   2 +
 drivers/pinctrl/pinctrl-ingenic.c             | 262 +++++++++++++++++-
 2 files changed, 262 insertions(+), 2 deletions(-)
Signature · 1 line
2.47.0