Skip to content

Add support for WL-ICLEDs from Wurth Elektronik

Ante Knezic linux-devicetree linux-doc linux-leds lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3Documentation: leds: Add docs for Wurth Elektronik WL-ICLEDDocumentation/leds/index.rst Documentation/leds/leds-wl-icled.rst+70 -01 reply
2/3dt-bindings: leds: add binding for WL-ICLEDDocumentation/devicetree/bindings/leds/leds-wl-icled.yaml+88 -04 replies
3/3leds: add WL-ICLED SPI driverdrivers/leds/Kconfig drivers/leds/Makefile drivers/leds/leds-wl-icled.c+417 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] Add support for WL-ICLEDs from Wurth Elektronik

From: Ante Knezic <[email protected]>

This patch adds support for WL-ICLED series of RGB Leds. These LEDs are equipped with integrated controller and can be daisy chained to arbitrary number of units. The MCU communicates with the first LED in series via SPI. Interface can be regular SPI protocol or single line only (MOSI connection only) depending on the model.

Ante Knezic (3):
Documentation: leds: Add docs for Wurth Elektronik WL-ICLED
dt-bindings: leds: add binding for WL-ICLED
leds: add WL-ICLED SPI driver

 .../bindings/leds/leds-wl-icled.yaml          |  88 ++++
 Documentation/leds/index.rst                  |   1 +
 Documentation/leds/leds-wl-icled.rst          |  69 +++
 drivers/leds/Kconfig                          |  10 +
 drivers/leds/Makefile                         |   1 +
 drivers/leds/leds-wl-icled.c                  | 406 ++++++++++++++++++
 6 files changed, 575 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-wl-icled.yaml
 create mode 100644 Documentation/leds/leds-wl-icled.rst
 create mode 100644 drivers/leds/leds-wl-icled.c
Signature · 1 line
2.48.1