Skip to content

net: dsa: lantiq_gswip: prepare for supporting MaxLinear GSW1xx

Daniel Golle lkml netdev 4 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 0 repliesApplied 6/6
  2. v36 patches 3 repliesSuperseded
  3. v26 patches 9 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v16 patches5 repliesSuperseded

Patches in v4 All 6 applied

#Subject and filesSizeRepliesApplied
1/6net: dsa: lantiq_gswip: move to dedicated folderMAINTAINERS drivers/net/dsa/Kconfig drivers/net/dsa/Makefile +5 more+11 -100 repliesApplied
2/6net: dsa: lantiq_gswip: support model-specific mac_select_pcs()drivers/net/dsa/lantiq/lantiq_gswip.c drivers/net/dsa/lantiq/lantiq_gswip.h+19 -30 repliesApplied
3/6net: dsa: lantiq_gswip: ignore SerDes modes in phylink_mac_config()drivers/net/dsa/lantiq/lantiq_gswip.c+4 -00 repliesApplied
4/6net: dsa: lantiq_gswip: support offset of MII registersdrivers/net/dsa/lantiq/lantiq_gswip.c drivers/net/dsa/lantiq/lantiq_gswip.h+13 -20 repliesApplied
5/6net: dsa: lantiq_gswip: support standard MDIO node namedrivers/net/dsa/lantiq/lantiq_gswip.c+3 -00 repliesApplied
6/6net: dsa: lantiq_gswip: move MDIO bus registration to .setup()drivers/net/dsa/lantiq/lantiq_gswip.c+7 -70 repliesApplied

Reviews trailers per patch

All 6 patches have a Reviewed-by or Acked-by.

PatchHauke MehrtensAndrew LunnAlexander Sverdlin
1/6R-b
2/6R-b
3/6R-b
4/6R-b
5/6R-b R-b R-b
6/6R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v4 thread

Cover letter [PATCH net-next v4 0/6] net: dsa: lantiq_gswip: prepare for supporting MaxLinear GSW1xx

Continue to prepare for supporting the newer standalone MaxLinear GSW1xx switch family by extending the existing lantiq_gswip driver to allow it to support MII interfaces and MDIO bus of the GSW1xx.

This series has been preceded by an RFC series which covers everything needed to support the MaxLinear GSW1xx family of switches. Andrew Lunn had suggested to split it into a couple of smaller series and start with the changes which don't yet make actual functional changes or support new features.

Everything has been compile and runtime tested on AVM Fritz!Box 7490 (GSWIP version 2.1, VR9 v1.2)

v4: fix newly introduced syntax error in struct initializer
v3: explicitly initialize mii_port_reg_offset to 0
v2: move lantiq_gswip driver to its own folder

Daniel Golle (6):
net: dsa: lantiq_gswip: move to dedicated folder
net: dsa: lantiq_gswip: support model-specific mac_select_pcs()
net: dsa: lantiq_gswip: ignore SerDes modes in phylink_mac_config()
net: dsa: lantiq_gswip: support offset of MII registers
net: dsa: lantiq_gswip: support standard MDIO node name
net: dsa: lantiq_gswip: move MDIO bus registration to .setup()

 MAINTAINERS                                 |  3 +-
 drivers/net/dsa/Kconfig                     |  8 +--
 drivers/net/dsa/Makefile                    |  2 +-
 drivers/net/dsa/lantiq/Kconfig              |  7 +++
 drivers/net/dsa/lantiq/Makefile             |  1 +
 drivers/net/dsa/{ => lantiq}/lantiq_gswip.c | 54 ++++++++++++++++-----
 drivers/net/dsa/{ => lantiq}/lantiq_gswip.h |  4 ++
 drivers/net/dsa/{ => lantiq}/lantiq_pce.h   |  0
 8 files changed, 57 insertions(+), 22 deletions(-)
 create mode 100644 drivers/net/dsa/lantiq/Kconfig
 create mode 100644 drivers/net/dsa/lantiq/Makefile
 rename drivers/net/dsa/{ => lantiq}/lantiq_gswip.c (98%)
 rename drivers/net/dsa/{ => lantiq}/lantiq_gswip.h (98%)
 rename drivers/net/dsa/{ => lantiq}/lantiq_pce.h (100%)
Signature · 1 line
2.51.0