Skip to content

i2c: Add Loongson-2K0300 I2C controller support

Binbin Zhou linux-devicetree linux-i2c loongarch 8 versions – Applied

Status from this message: merged to i2c/i2c-host-v7.1

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v8 Latest2 patches 1 replyApplied
  2. v72 patches 4 repliesSuperseded
  3. v62 patches 5 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v52 patches4 repliesSuperseded
v42 patches2 repliesSuperseded
v32 patches2 repliesSuperseded
v22 patches7 repliesSuperseded
v12 patches3 repliesSuperseded

Changes in v8 from the cover letter

Patch (2/2):
- Since the physical unit is specific, revert the change made in v7 to replace MHz with mhz.

Patches in v8 Applied

#Subject and filesSizeRepliesApplied
1/2dt-bindings: i2c: loongson,ls2x: Add ls2k0300-i2c compatibleDocumentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml+4 -00 replies
2/2i2c: ls2x-v2: Add driver for Loongson-2K0300 I2C controllerMAINTAINERS drivers/i2c/busses/Kconfig drivers/i2c/busses/Makefile +1 more+557 -00 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchConor DooleyHuacai ChenAndy Shevchenko
1/2A-b R-b
2/2R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v8 thread

Cover letter [PATCH v8 0/2] i2c: Add Loongson-2K0300 I2C controller support

Hi all:

This patch set describes the I2C controller integrated the Loongson-2K0300 chip.

It has a significantly different design from the previous I2C controller(i2c-ls2x), such as support for master-slave transfer mode, and DMA transfers (implementation in progress), etc. Therefore, we try to name it i2c-ls2x-v2.

Thanks.

======
V8:
Patch (2/2):
- Since the physical unit is specific, revert the change made in v7 to replace MHz with mhz.

Link to V7:
https://lore.kernel.org/all/[email protected]/

V7:
- Add Reviewed-by tag from Huacai & Andy, thanks. Patch (2/2):
- Add the REGMAP_MMIO Kconfig dependency;
- parent_rate_MHz -> parent_rate_mhz to avoid CamelCase.

Link to V6:
https://lore.kernel.org/all/[email protected]/

V6:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- Update comment;
- Use regmap_get_device();

Link to V5:
https://lore.kernel.org/all/[email protected]/

V5:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- Add time.h header file;
- Add the MHz suffix to parent_rate and freq;
- Define an iterator within the for loop, with its type being

    `unsigned int`;

- Use dev_err_probe() in loongson2_i2c_adjust_bus_speed();
- i2c_adapter_set_node()->device_set_node().

Link to V4:
https://lore.kernel.org/all/[email protected]/

V4:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- The parent_rate parameter type should be unsigned long;
- Drop fallthrough and add missing break;
- device_set_node()->i2c_adapter_set_node();
- Use i2c_parse_fw_timings();
- Use i2c_t.bus_freq_hz instead of priv->speed;
- Sperate loongson2_i2c_handle_read() into loongson2_i2c_handle_read() and loongson2_i2c_handle_rx_done().

Link to V3:
https://lore.kernel.org/all/[email protected]/

V3:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- Reorder header file follow IWYU principle;
- Better indentation and coding style;
- Use generic macro definitions;
- Amend *all* struct data types;
- Correct unreasonable variable type definitions;
- Refact loongson2_i2c_isr_error();
- of_property_read_u32()->device_property_read_u32();
- Remove meaningless blank lines and output.

Link to V2:
https://lore.kernel.org/all/[email protected]/

V2:
Patch (1/2):
- Add Acked-by tag from Conor, thanks.

Patch (2/2):
- Reorder the definitions of read() and write();
- Adjust the calculation method for bus speed.

Link to V1:
https://lore.kernel.org/all/[email protected]/

Binbin Zhou (2):
dt-bindings: i2c: loongson,ls2x: Add ls2k0300-i2c compatible
i2c: ls2x-v2: Add driver for Loongson-2K0300 I2C controller

 .../bindings/i2c/loongson,ls2x-i2c.yaml       |   4 +
 MAINTAINERS                                   |   1 +
 drivers/i2c/busses/Kconfig                    |  11 +
 drivers/i2c/busses/Makefile                   |   1 +
 drivers/i2c/busses/i2c-ls2x-v2.c              | 544 ++++++++++++++++++
 5 files changed, 561 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-ls2x-v2.c

base-commit: 8fc326e15895c9f0403e6243dd4ad468b10aab3d

Signature · 1 line
2.52.0