Skip to content

imx9{4,5,52}: Add Quickboot support

Simona Toaca (OSS) u-boot 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest4 patches 16 repliesIn review
  2. v36 patches 12 repliesSuperseded
  3. v25 patches 18 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v15 patches9 repliesSuperseded

Changes in v4 from the cover letter

- add IMX_QB macro to include qb.c based on the boot phase
- change qb_ prefix to imx_qb_ for qb.c methods, to
be more specific
- add boot device macro to string conversion for the case where the device is not explicitly specified
- pass quickboot args as strings and parse them in qb.c using blk_device_get_by_str/blk_device_part_str (if they are blk devices). This enables specifying mmc 0:2 for the boot1 partition of the eMMC device.
- use blk device API instead of mmc-specific
- use SPI DM methods for spi flash read/write
- use malloc for storing container header instead of kmalloc
- add eMMC hwpart usage to the documentation
- sent the qb-unrelated patches separately

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4imx9: Add support for saving DDR training data to NVMarch/arm/include/asm/arch-imx9/ddr.h arch/arm/include/asm/mach-imx/qb.h arch/arm/mach-imx/Kconfig +4 more+492 -315 replies
2/4arm: mach-imx: Add command to expose QB functionalityarch/arm/mach-imx/Kconfig arch/arm/mach-imx/Makefile arch/arm/mach-imx/cmd_qb.c+114 -00 replies
3/4board: nxp: imx9{4, 5, 52}_evk: Add qb save option in SPLarch/arm/mach-imx/Kconfig board/nxp/imx94_evk/spl.c board/nxp/imx952_evk/spl.c +1 more+22 -20 replies
4/4doc: board: nxp: Add Quickboot documentationdoc/board/nxp/index.rst doc/board/nxp/quickboot.rst+60 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH v4 0/4] imx9{4,5,52}: Add Quickboot support

From: Simona Toaca <[email protected]>

This patch series adds support for saving DDR training data to non-volatile memory on iMX94, iMX95 and iMX952 platforms. The purpose is running DDR Quickboot flow on next reboot.

The process is as follows:
- OEI runs Training flow for the DDRPHY
- OEI saves the data from training to volatile memory
- U-Boot can then save it to non-volatile memory (e.g. SD)
- OEI loads the data from NVM at cold reboot and runs Quickboot flow

By skipping training, a much lower boot time is achieved.

Changes for v4:
- add IMX_QB macro to include qb.c based on the boot phase
- change qb_ prefix to imx_qb_ for qb.c methods, to
be more specific
- add boot device macro to string conversion for the case where the device is not explicitly specified
- pass quickboot args as strings and parse them in qb.c using blk_device_get_by_str/blk_device_part_str (if they are blk devices). This enables specifying mmc 0:2 for the boot1 partition of the eMMC device.
- use blk device API instead of mmc-specific
- use SPI DM methods for spi flash read/write
- use malloc for storing container header instead of kmalloc
- add eMMC hwpart usage to the documentation
- sent the qb-unrelated patches separately

Changes for v3:
- Rebased and added support for iMX952
- Removed IMX_SNPS_DDR_PHY_QB_GEN macro, as it was not useful -> now CMD_QB is enabled by default on the supported boards
- Removed unnecessary #ifdefs -> replaced with if (CONFIG..)
- Replaced spi_flash_probe with udevice_first_device_err to avoid using SPI macros that needed ifdefs, since there is only one SPI flash device available.
- Adnotated qb methods with qb_ to be easier to see in asm dump
- Removed explicit pointer casts from (void *)
- Replaced custom qb_crc32 with the U-Boot one
- Made eveything snake_case
- Enabled SFDP support for iMX943/95, as it is necessary for proper erase size parsing (and is already present in iMX952 config)
- Improved documentation - explanation about the space in bootloader
- Added commit fixing a style issue in Kconfig

Changes for v2:
- Improved documentation to clarify the questions asked
- Detailed log messages for all commits
- Detailed Kconfig options for SPL_IMX_QB and CMD_IMX_QB
- Fixed the mentioned coding style issues

Simona Toaca (4):
imx9: Add support for saving DDR training data to NVM
arm: mach-imx: Add command to expose QB functionality
board: nxp: imx9{4,5,52}_evk: Add qb save option in SPL
doc: board: nxp: Add Quickboot documentation

 arch/arm/include/asm/arch-imx9/ddr.h |  48 +++-
 arch/arm/include/asm/mach-imx/qb.h   |  15 +
 arch/arm/mach-imx/Kconfig            |  28 ++
 arch/arm/mach-imx/Makefile           |   1 +
 arch/arm/mach-imx/cmd_qb.c           | 102 +++++++
 arch/arm/mach-imx/imx9/Makefile      |   6 +-
 arch/arm/mach-imx/imx9/qb.c          | 403 +++++++++++++++++++++++++++
 arch/arm/mach-imx/imx9/scmi/soc.c    |   7 +
 board/nxp/imx94_evk/spl.c            |   6 +-
 board/nxp/imx952_evk/spl.c           |   4 +
 board/nxp/imx95_evk/spl.c            |   6 +-
 doc/board/nxp/index.rst              |   1 +
 doc/board/nxp/quickboot.rst          |  59 ++++
 drivers/ddr/imx/imx9/Kconfig         |   7 +
 14 files changed, 688 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/include/asm/mach-imx/qb.h
 create mode 100644 arch/arm/mach-imx/cmd_qb.c
 create mode 100644 arch/arm/mach-imx/imx9/qb.c
 create mode 100644 doc/board/nxp/quickboot.rst
Signature · 1 line
2.43.0