Skip to content

u-boot: pinctrl: scmi: Use standard pin muxing format

Dan Carpenter arm-scmi u-boot 1 version Applied

Status from this message: Applied to fsl-qoriq-for-2026.07-rc1, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 4 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/2firmware: scmi: Fix setting the functiondrivers/firmware/scmi/pinctrl.c+2 -02 replies
2/2pinctrl: scmi: Use standard device tree pin muxing formatdrivers/pinctrl/pinctrl-scmi.c+54 -971 reply

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchLinus Walleij
1/2
2/2A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] u-boot: pinctrl: scmi: Use standard pin muxing format

In my original code I created a custom format for pin muxing but it's better to use the standard format. I also found a bug trying to use set the function. (That code wasn't used previously).

My GPIO driver is not affected by this change:
https://lore.kernel.org/all/ff0756d9a26c95540fb65a35765e9a43949a5814.1774350851.git.dan.carpenter@linaro.org/

Dan Carpenter (2):
firmware: scmi: Fix setting the function
pinctrl: scmi: Use standard device tree pin muxing format

 drivers/firmware/scmi/pinctrl.c |   2 +
 drivers/pinctrl/pinctrl-scmi.c  | 151 ++++++++++++--------------------
 2 files changed, 56 insertions(+), 97 deletions(-)
Signature · 1 line
2.53.0