dt-bindings: arm64: dts: Intel SoCFPGA: rsu-handle on svc for U-Boot

From: Tze Yee Ng <[email protected]>

When Linux passes a device tree to U-Boot for remote system update (RSU), U-Boot needs to know which QSPI partition holds the boot image. Add an optional rsu-handle property on the Intel service-layer (svc) node: it is a phandle to the board's QSPI boot partition (typically labeled qspi_boot).

Patch 1 documents rsu-handle in the intel,stratix10-svc binding (shared by Stratix 10, Agilex, and Agilex5 svc compatibles) and extends the example so the qspi_boot label and reg cells are valid for dt_binding_check.

Patch 2 labels the firmware svc node as "svc" in the Stratix 10, Agilex, and Agilex5 SoC .dtsi files, and sets rsu-handle = <&qspi_boot> via &svc only on board .dts files that already define qspi_boot. Boards without that partition are unchanged and avoid an unresolved phandle.

Tze Yee Ng (2):
dt-bindings: firmware: document rsu-handle for intel stratix10-svc
arm64: dts: socfpga: add rsu-handle to svc on QSPI SoCDK boards

 .../firmware/intel,stratix10-svc.yaml         | 25 +++++++++++++++++++
 .../boot/dts/altera/socfpga_stratix10.dtsi    |  2 +-
 .../dts/altera/socfpga_stratix10_socdk.dts    |  4 +++
 .../altera/socfpga_stratix10_socdk_nand.dts   |  4 +++
 arch/arm64/boot/dts/intel/socfpga_agilex.dtsi |  2 +-
 .../boot/dts/intel/socfpga_agilex3_socdk.dts  |  4 +++
 .../arm64/boot/dts/intel/socfpga_agilex5.dtsi |  2 +-
 .../boot/dts/intel/socfpga_agilex5_socdk.dts  |  4 +++
 .../dts/intel/socfpga_agilex5_socdk_013b.dts  |  4 +++
 .../intel/socfpga_agilex5_socdk_modular.dts   |  4 +++
 .../boot/dts/intel/socfpga_agilex_socdk.dts   |  4 +++
 .../boot/dts/intel/socfpga_n5x_socdk.dts      |  4 +++
 12 files changed, 60 insertions(+), 3 deletions(-)

2.43.7