Skip to content

arm64: dts: intel: agilex5: enable USB3.1 on SoCDK

Adrian Ng Ho Yin linux-devicetree lkml sashiko-reviews 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v8 Latest2 patches 0 repliesNew
  2. v72 patches 3 repliesApplied

Changes in v8 from the cover letter

* Rename simple-bus wrapper node from usb-bus@11000000 to bus@11000000 (Krzysztof Kozlowski). Use an approved simple-bus node name; do not invent usb-bus.

Patches in v8 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2arm64: dts: intel: agilex5: add USB3.1 controller nodearch/arm64/boot/dts/intel/socfpga_agilex5.dtsi arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts+40 -00 replies
2/2arm64: dts: intel: agilex5: remove usb0 in Agilex5 SoCDKarch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts+0 -50 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v8 yet.

Read the v8 thread

Cover letter [PATCH v8 0/2] arm64: dts: intel: agilex5: enable USB3.1 on SoCDK

Add the Agilex5 USB3.1 DWC3 controller node and enable it in host mode on the SoCDK board. Place the controller under a simple-bus with a 40-bit dma-ranges window so the DMA/IOMMU stack respects the interconnect address width when SMMU is enabled.

The SoCDK daughter card only exposes the USB3.1 interface, so the unused USB0 (DWC2) board enablement is removed in a follow-up patch.

This DTS series is posted separately from the USB bindings/driver series ("[PATCH v7 0/2] usb: dwc3: add Altera Agilex5 DWC3 support"). Depends on compatible "altr,agilex5-dwc3" from that series.

---
changelog:
v7->v8:
* Rename simple-bus wrapper node from usb-bus@11000000 to bus@11000000 (Krzysztof Kozlowski). Use an approved simple-bus node name; do not invent usb-bus.

v6->v7:
* Split out of the USB series into a standalone DTS posting.

Previous DTS series (v7):
https://lore.kernel.org/all/[email protected]/

Previous combined series (v6):
https://lore.kernel.org/all/[email protected]/
---

Adrian Ng Ho Yin (2):
arm64: dts: intel: agilex5: add USB3.1 controller node
arm64: dts: intel: agilex5: remove usb0 in Agilex5 SoCDK

 .../arm64/boot/dts/intel/socfpga_agilex5.dtsi | 35 +++++++++++++++++++
 .../boot/dts/intel/socfpga_agilex5_socdk.dts  |  4 +--
 2 files changed, 37 insertions(+), 2 deletions(-)

base-commit: 93f51579e7df248780214094418f205253383cc5

Signature · 1 line
2.49.GIT