Skip to content

pinctrl: ingenic: Add X2600 support

H. Nikolaus Schaller linux-devicetree linux-gpio linux-mips lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 6 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3dt-bindings: pinctrl: ingenic: Add X2600 supportDocumentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml+6 -41 reply
2/3pinctrl: ingenic: Add X2600 register and GPIO IRQ supportdrivers/pinctrl/pinctrl-ingenic.c+58 -135 replies
3/3pinctrl: ingenic: Add X2600 pin groups and functionsdrivers/pinctrl/pinctrl-ingenic.c+502 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchConor Dooley
1/3A-b
2/3
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] pinctrl: ingenic: Add X2600 support

PATCH V1 2026-11-13 09:13:47:

This series adds pinctrl and GPIO support for the Lumissil X2600 SoC.

It introduces the devicetree bindings, adapts the register access and GPIO interrupt handling to the X2600 hardware, and adds the pin groups and mux functions.

The changes also correct hardware both-edge GPIO interrupt configuration on X1600 and X2000.

The updated driver has been tested on X1600, X2000, and X2600 including GPIO both-edge interrupt handling.

The code has been tested by ChatGPT which also helped to formulate the messages.

H. Nikolaus Schaller (3):
dt-bindings: pinctrl: ingenic: Add X2600 support
pinctrl: ingenic: Add X2600 register and GPIO IRQ support
pinctrl: ingenic: Add X2600 pin groups and functions

 .../bindings/pinctrl/ingenic,pinctrl.yaml     |  10 +-
 drivers/pinctrl/pinctrl-ingenic.c             | 573 +++++++++++++++++-
 2 files changed, 566 insertions(+), 17 deletions(-)
Signature · 1 line
2.56.0