Skip to content

phy: marvell: cp110: fix Armada 8k rev B0 boot hang

Stefan Roese u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 of 3 patches 0 repliesNew

1 of 3 patches is in this archive. The cover letter announces 3.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3phy: marvell: cp110: let the firmware configure the comphy+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/3] phy: marvell: cp110: fix Armada 8k rev B0 boot hang

Hi Baruch,

Quoted 5 lines · Baruch Siach

Boot of Armada 8040 rev B0 hangs when U-Boot attempts to initialize the PCIe serdes. Adapt patches from downstream Marvell tree that move serdes initialization to ATF.

This series requires upstream ATF version 2.1 or newer.

Is there a way to detect if an older ATF is installed and print an error message (warning) in this case?

Thanks,
Stefan