Skip to content

net: phy: fixed_phy: replace list of fixed PHYs with static array

Heiner Kallweit netdev 2 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (main)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 1 replyApplied 2/2
  2. v11 patch 6 repliesSuperseded

Patches in v2 All 2 applied

#Subject and filesSizeRepliesApplied
1/2net: phy: fixed_phy: replace list of fixed PHYs with static arraydrivers/net/phy/fixed_phy.c+17 -520 repliesApplied
2/2net: phy: fixed_phy: replace IDA with a bitmapdrivers/net/phy/fixed_phy.c+17 -70 repliesApplied

Reviews trailers per patch

None of the 2 patches has a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchMaxime Chevallier
SeriesT-b R-b
1/2
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH net-next v2 0/2] net: phy: fixed_phy: replace list of fixed PHYs with static array

Due to max 32 PHY addresses being available per mii bus, using a list can't support more fixed PHY's. And there's no known use case for as much as 32 fixed PHY's on a system. 8 should be plenty of fixed PHY's, so use an array of that size instead of a list. This allows to significantly reduce the code size and complexity.
In addition replace heavy-weight IDA with a simple bitmap.

Heiner Kallweit (2):
net: phy: fixed_phy: replace list of fixed PHYs with static array
net: phy: fixed_phy: replace IDA with a bitmap

 drivers/net/phy/fixed_phy.c | 83 +++++++++++++------------------------
 1 file changed, 29 insertions(+), 54 deletions(-)
Signature · 1 line
2.52.0