Skip to content

Makefile: rework / cleanup

Detlev Zundel u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchDetlev Zundel
SeriesA-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/3] Makefile: rework / cleanup

Hi Wolfgang,

Quoted 7 lines

The top level Makefile is growing and growing. Once, wehn we suppoted only a few tens of boards, it was possible to implement board configuration logic in the Makefile, but it quickly turned out that this doesn't scale. Also, it is not really needed (at least not any more) - we noch have mechanisnms in place, that allow for more efficient code.

Quoted 7 lines

The following patch series is an attempt to start some cleanup and reduce the size of the top level Makefile. The solution is neither perfect nor complete - there are quite a lot of boards that resist such a cleanup and need more thorough cleanup. But it's an initial step, showing what could and should be done, which boards have problems, and why this is the case. Eentually this paves the ground for a more friendly way to add new board configurations.

Wow, thanks for these cleanups. This is absolutely a good direction to simplify the makefile. For all three parts you have my

Cheers
Detlev

Signature · 8 lines
As a general remark, you're more likely to get meaningful feedback if you just
submit what you think is best. You'll get more feedback when people don't like
what you did,  but any  EE will tell you that negative feedback is the path to
stability.                          -- Ben Warren <[email protected]>
--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.de