Skip to content

mmc: meson-gx: code and performance improvements

Kevin Hilman linux-amlogic linux-mmc 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 18 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 18 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 00/18] mmc: meson-gx: code and performance improvements

Hi Heiner,

Quoted 8 lines · Heiner Kallweit

This patch series includes several improvements and boosted the read performance from 13 MB/s to 32 MB/s (at 60MHz clock rate) on a Odroid C2 with a 128GB eMMC module.

Higher frequencies needed tuning in my case. With some hacked test tuning I reached 52 MB/s at 200MHz.
With a 8GB card 200MHz were stable out of the box, but with less performacne.

Thanks for the series and improvements. I'm not very familiar with MMC, so I've been hoping someone would come along and improve this driver. I really appreciate it.

There are a few comments I've made on individual patches in the series.

It will probably be helpful to the MMC maintainers if you separate the series into:

- cleanups (non-functional changes)
- fixes: things that fix actual bugs (not sure there are any in this series)

followed by a series that does the functional changes.

Also, can I recommend that you use git-format-patch and git-send-email to export and email your patches? If you use git-send-email, all of the individual patches will be sent as a reply to the cover-letter, making the threading work better and generally make readers/reviewers happier.

Thanks again for the great work,

Kevin

Quoted 22 lines

Heiner Kallweit (18):
mmc: meson-gx: set segment host parameters
mmc: meson-gx: remove code for unsupported CMD23
mmc: meson-gx: explicitely call stop command for multi-block commands only
mmc: meson-gx: improve meson_mmc_start_cmd
mmc: meson-gx: eliminate struct sd_emmc_data
mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
mmc: meson-gx: check return value of sg_copy_[from,to]_buffer
mmc: meson-gx: make two functions return void
mmc: meson-gx: change interrupt name
mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host
mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init
mmc: meson-gx: remove member parent_mux from struct meson_host
mmc: meson-gx: remove unneeded meson_mmc_clk_set in meson_mmc_clk_init
mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init
mmc: meson-gx: improve initial configuration
mmc: meson-gx: improve response reading and sending stop command
mmc: meson-gx: remove member mrq from struct meson_host
mmc: meson-gx: move handling of one case from threaded handler to main irq

 drivers/mmc/host/meson-gx-mmc.c | 241 ++++++++++++++++------------------------
 1 file changed, 97 insertions(+), 144 deletions(-)