Add DT support for NAND to LCDK via ti-aemif
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest posting 2/20 of 4 patches 0 repliesNew
- v3 posting 1/20 of 4 patches 0 repliesSuperseded
Patches in v3 posting 2/2 No applies recorded yet
None of the 4 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [PATCH v3 0/4] Add DT support for NAND to LCDK via ti-aemif
Quoted 15 lines · Kevin Hilman
Quoted 4 lines · Karl Beldan
Here is another spin. I could get my hands on an EVM and test the changes on it as well. Doing so, I could also observe that 4bit ECC on 8bits NANDS is currently broken in mailine. Apparently there had already been some alerts on the mailing list some months ago.
[...]
Quoted 5 lines
Karl Beldan (4):
ARM: davinci: da8xx-dt: Add ti-aemif lookup for clock matching
ARM:davinci_all_defconfig: Enable AEMIF as a module
ARM: dts: da850,da850-evm: Add an aemif node and use it for the NAND
ARM: dts: da850-lcdk: Add NAND to DT
Quoted 4 lines
Tested on DA850-LCDK with UBIFS.
Tested-by Kevin Hilman <[email protected]>
I forgot to mention that I had to enable:
CONFIG_UBIFS_FS=yCONFIG_MTD_UBI=y
in order to test with ubifs. Care to send a patch adding these as modules to davinci_all_defconfig?
Thanks,
Kevin