cns3xxx multiplatform support
Get series with b4
b4 am op.wuo9vcxg2s3iss@ecazVersions newest first
- v1 Latest0 of 5 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/5] cns3xxx multiplatform support
Hi Mac Lin,
Quoted 45 lines · Mac Lin
Hi Arnd, Anton,
2013/3/17 Anton Vorontsov <[email protected]>:Quoted 9 lines
Hi Arnd,
Quoted 5 lines · Arnd Bergmann
I've looked at all the platforms recently to see what their state is. cns3xxx seems quite clean but not very actively maintained. Since it is really easy to convert to multiplatform, that's what I did here. I'd like to apply this for linux-3.9 unless there are objections or other comments.
Quoted 7 lines
I might have some old self-made QEMU emulator for CNS3xxx boards, but I am not sure if I could revive it quickly. Maybe Cavium folks could test it faster than me though (some Cc'ed, some Bcc'ed).
But the patches themselves look great, so:
Acked-by Anton Vorontsov <[email protected]>Sorry for the late response. I have not tested since 3.2, and it fail booting almost right after 3.2....
It take me some time to be able to boot 3.9-rc1. I'll send the patch in another mail.The image of 3.9-rc1+the patches boots fine but with one warning which is not seen without the patches:
NR_IRQS:16 nr_irqs:96 96------------[ cut here ]------------ WARNING: at drivers/irqchip/irq-gic.c:782 gic_init_bases+0x284/0x2e8() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated Modules linked in: Backtrace: [<c000c6f0>] (dump_backtrace+0x0/0x10c) from [<c01cf158>] (dump_stack+0x18/0x1c) r7:c028df40 r6:c027d39c r5:c023d888 r4:0000030e [<c01cf140>] (dump_stack+0x0/0x1c) from [<c0016be0>] (warn_slowpath_common+0x54) [<c0016b8c>] (warn_slowpath_common+0x0/0x70) from [<c0016ca0>] (warn_slowpath_f) r9:410fb024 r8:c02943b4 r7:00000050 r6:00000010 r5:00000010r4:00000000
[<c0016c68>] (warn_slowpath_fmt+0x0/0x40) from [<c027d39c>] (gic_init_bases+0x2)
r3:00000010 r2:c023d8d8
[<c027d118>] (gic_init_bases+0x0/0x2e8) from [<c0271aa8>] (cns3xxx_init_irq+0x3)
r8:c0294000 r7:c02a4300 r6:ffffffff r5:c02849e8 r4:3fffffff
[<c0271a78>] (cns3xxx_init_irq+0x0/0x40) from [<c026d1bc>] (init_IRQ+0x1c/0x24) [<c026d1a0>] (init_IRQ+0x0/0x24) from [<c026a800>] (start_kernel+0x164/0x2e4) [<c026a69c>] (start_kernel+0x0/0x2e4) from [<00008070>] (0x8070)
r8:00004008 r7:c02955ec r6:c02849e4 r5:c029408c r4:00c5387d
Quoted 4 lines
---[ end trace 1b75b31a2719ed1c ]---I have my code pushed to https://github.com/mkl0301/linux.git, branch cns3v20vb-3.9-multiplatform-test, in case you need them.
Please try applying the patches we have in OpenWrt [1], especially the first few. Most of them should apply fine, but I'll try to update them for 3.9 this weekend. When that's done, we should migrate the additional hw support to DT and merge whatever we can into mainline.
Imre
[1] https://dev.openwrt.org/browser/trunk/target/linux/cns3xxx/patches-3.8