More commit-graph/Bloom filter improvements

This builds on sg/commit-graph-cleanups, which took several patches from Szeder's series [1] and applied them almost directly to a more-recent version of Git [2].

[1] https://lore.kernel.org/git/[email protected]/
[2]
https://lore.kernel.org/git/[email protected]/

This series adds a few extra improvements, several of which are rooted in Szeder's original series. I maintained his authorship and sign-off, even though the patches did not apply or cherry-pick at all.

(In v2, I have removed the range-diff comparison to Szeder's series, so look at the v1 cover letter for that.)

The patches have been significantly reordered. René pointed out (and Szeder discovered in the old thread) that we are not re-using the bloom_filter_settings from the existing commit-graph when writing a new one.

1. commit-graph: place bloom_settings in context
2. commit-graph: change test to die on parse, not load

These are mostly the same, except we now use a pointer to the settings in the commit-graph write context.

3. bloom: get_bloom_filter() cleanups

This new patch is a subtle change in behavior that will become relevant in the very next patch. In fact, if we swap patch 3 and 4, then t4216-log-bloom.sh fails with a segfault due to a NULL filter.

4. commit-graph: persist existence of changed-paths

This patch is now updated to use the existing changed-path filter settings.

5. commit-graph: unify the signatures of all write_graph_chunk_*() functions
6. commit-graph: simplify chunk writes into loop
7. commit-graph: check chunk sizes after writing

These are all the same as before.

8. revision.c: fix whitespace

This patch is the cleanup part of Taylor's patch.

9. revision: empty pathspecs should not use Bloom filters

Here is Taylor's fix for empty pathspecs.

10. commit-graph: check all leading directories in changed path Bloom filters
11. bloom: enforce a minimum size of 8 bytes

Finally, we get these performance patches. Patch 10 is updated to have the better logic around directory separators and empty paths. Also, the list of Bloom keys is ordered with the deepest path first. That has some tiny performance benefits for deep paths since we can short-circuit the multi-key checks more often. That code path is much faster than the tree parsing, so it is hard to measure any change.

Updates in V3:

* Responded to René's feedback.
* Fixed the test in Patch 4 to use GIT_TEST_ variables and extend the GIT_TRACE2 depth to work with 'seen' branch.

Update in V4;

* Fixed the bug with "too large" commits. Test is added. The fixup! I sent earlier doesn't actually squash cleanly, so I resolved the conflicts during the rebase.

Thanks, -Stolee

Derrick Stolee (5):
commit-graph: place bloom_settings in context
commit-graph: change test to die on parse, not load
bloom: fix logic in get_bloom_filter()
commit-graph: persist existence of changed-paths revision.c: fix whitespace

SZEDER Gábor (4):
commit-graph: unify the signatures of all write_graph_chunk_*()
functions
commit-graph: simplify chunk writes into loop
commit-graph: check chunk sizes after writing
commit-graph: check all leading directories in changed path Bloom
filters

Taylor Blau (1):
revision: empty pathspecs should not use Bloom filters

 Documentation/git-commit-graph.txt |   5 +-
 bloom.c                            |  14 ++-
 builtin/commit-graph.c             |   5 +-
 commit-graph.c                     | 146 +++++++++++++++++++++--------
 commit-graph.h                     |   3 +-
 revision.c                         |  63 +++++++++----
 revision.h                         |   6 +-
 t/t4216-log-bloom.sh               |  45 ++++++++-
 t/t5318-commit-graph.sh            |   2 +-
 9 files changed, 215 insertions(+), 74 deletions(-)

base-commit: 7fbfe07ab4d4e58c0971dac73001b89f180a0af3
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-659%2Fderrickstolee%2Fbloom-2-v4
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-659/derrickstolee/bloom-2-v4
Pull-Request: https://github.com/gitgitgadget/git/pull/659

Range-diff vs v3:

  1:  57002040bc =  1:  57002040bc commit-graph: place bloom_settings in context
  2:  6b63f9bd8a =  2:  6b63f9bd8a commit-graph: change test to die on parse, not load
  3:  2f809499ab !  3:  3c532ebabc bloom: fix logic in get_bloom_filter()

@@ Commit message

Also clean up some style issues while we are here.

+ One side-effect of returning a NULL filter is that the filters that are
+ reported as "too large" will now be reported as NULL insead of length
+ zero. This case was not properly covered before, so add a test. Further,
+ remote the counting of the zero-length filters from revision.c and the
+ trace2 logs.
+

+ Helped-by: SZEDER Gábor <[email protected]>

## bloom.c ##
@@ bloom.c: struct bloom_filter *get_bloom_filter(struct repository *r,

repo_diff_setup(r, &diffopt);
diffopt.flags.recursive = 1;
+
+ ## commit-graph.c ##
+@@ commit-graph.c: static void write_graph_chunk_bloom_indexes(struct hashfile *f,
+
+ while (list < last) {
+ struct bloom_filter *filter = get_bloom_filter(ctx->r, *list, 0);
+- cur_pos += filter->len;
++ size_t len = filter ? filter->len : 0;
++ cur_pos += len;
+ display_progress(progress, ++i);
+ hashwrite_be32(f, cur_pos);
+ list++;
+@@ commit-graph.c: static void write_graph_chunk_bloom_data(struct hashfile *f,
+
+ while (list < last) {
+ struct bloom_filter *filter = get_bloom_filter(ctx->r, *list, 0);
++ size_t len = filter ? filter->len : 0;
+ display_progress(progress, ++i);
+- hashwrite(f, filter->data, filter->len * sizeof(unsigned char));
++
++ if (len)
++ hashwrite(f, filter->data, len * sizeof(unsigned char));
+ list++;
+ }
+
+
+ ## revision.c ##
+@@ revision.c: static unsigned int count_bloom_filter_maybe;
+ static unsigned int count_bloom_filter_definitely_not;
+ static unsigned int count_bloom_filter_false_positive;
+ static unsigned int count_bloom_filter_not_present;
+-static unsigned int count_bloom_filter_length_zero;
+
+ static void trace2_bloom_filter_statistics_atexit(void)
+ {
+@@ revision.c: static void trace2_bloom_filter_statistics_atexit(void)
+
+ jw_object_begin(&jw, 0);
+ jw_object_intmax(&jw, "filter_not_present", count_bloom_filter_not_present);
+- jw_object_intmax(&jw, "zero_length_filter", count_bloom_filter_length_zero);
+ jw_object_intmax(&jw, "maybe", count_bloom_filter_maybe);
+ jw_object_intmax(&jw, "definitely_not", count_bloom_filter_definitely_not);
+ jw_object_intmax(&jw, "false_positive", count_bloom_filter_false_positive);
+@@ revision.c: static int check_maybe_different_in_bloom_filter(struct rev_info *revs,
+ return -1;
+ }
+
+- if (!filter->len) {
+- count_bloom_filter_length_zero++;
+- return -1;
+- }
+-
+ result = bloom_filter_contains(filter,
+ revs->bloom_key,
+ revs->bloom_filter_settings);
+
+ ## t/t4216-log-bloom.sh ##
+@@ t/t4216-log-bloom.sh: setup () {
+
+ test_bloom_filters_used () {
+ log_args=$1
+- bloom_trace_prefix="statistics:{\"filter_not_present\":0,\"zero_length_filter\":0,\"maybe\""
++ bloom_trace_prefix="statistics:{\"filter_not_present\":0,\"maybe\""
+ setup "$log_args" &&
+ grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" &&
+ test_cmp log_wo_bloom log_w_bloom &&
+@@ t/t4216-log-bloom.sh: test_expect_success 'setup - add commit-graph to the chain with Bloom filters' ' +
+ test_bloom_filters_used_when_some_filters_are_missing () {
+ log_args=$1
+- bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"zero_length_filter\":0,\"maybe\":8,\"definitely_not\":6"
++ bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"maybe\":8,\"definitely_not\":6"
+ setup "$log_args" &&
+ grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" &&
+ test_cmp log_wo_bloom log_w_bloom
+@@ t/t4216-log-bloom.sh: test_expect_success 'Use Bloom filters if they exist in the latest but not all c
+ test_bloom_filters_used_when_some_filters_are_missing "-- A/B"
+ '
+
++test_expect_success 'correctly report changes over limit' '
++ git init 513changes &&
++ (
++ cd 513changes &&
++ for i in $(test_seq 1 513)
++ do
++ echo $i >file$i.txt || return 1
++ done &&
++ git add . &&
++ git commit -m "files" &&
++ git commit-graph write --reachable --changed-paths &&
++ for i in $(test_seq 1 513)
++ do
++ git -c core.commitGraph=false log -- file$i.txt >expect &&
++ git log -- file$i.txt >actual &&
++ test_cmp expect actual || return 1
++ done
++ )
++'
++
+ test_done
+ \ No newline at end of file
4: 33e22d05cb ! 4: f1e3a8516e commit-graph: persist existence of changed-paths
@@ t/t4216-log-bloom.sh: test_expect_success 'Use Bloom filters if they exist in th
+ grep "{\"hash_version\":1,\"num_hashes\":9,\"bits_per_entry\":15}" trace2-auto.txt
+'
+
- test_done
- \ No newline at end of file
+ test_expect_success 'correctly report changes over limit' '
+ git init 513changes &&
+ (

  5:  81c45d5260 =  5:  c079921473 commit-graph: unify the signatures of all write_graph_chunk_*() functions
  6:  8828dcd906 =  6:  5ed0ce20a4 commit-graph: simplify chunk writes into loop
  7:  ddbf297755 =  7:  b982c9bf80 commit-graph: check chunk sizes after writing
  8:  8b63706141 =  8:  af750d8887 revision.c: fix whitespace
  9:  7d6163305a =  9:  a95de3cceb revision: empty pathspecs should not use Bloom filters
 10:  40061233ca ! 10:  9c4a00ab08 commit-graph: check all leading directories in changed path Bloom filters
     @@ t/t4216-log-bloom.sh: test_expect_success 'setup - add commit-graph to the chain
       
       test_bloom_filters_used_when_some_filters_are_missing () {
       	log_args=$1
     --	bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"zero_length_filter\":0,\"maybe\":8,\"definitely_not\":6"
     -+	bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"zero_length_filter\":0,\"maybe\":6,\"definitely_not\":8"
     +-	bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"maybe\":8,\"definitely_not\":6"
     ++	bloom_trace_prefix="statistics:{\"filter_not_present\":3,\"maybe\":6,\"definitely_not\":8"
       	setup "$log_args" &&
       	grep -q "$bloom_trace_prefix" "$TRASH_DIRECTORY/trace.perf" &&
       	test_cmp log_wo_bloom log_w_bloom

gitgitgadget