Skip to contentSkip to conversation

uboot for TI DSP c6000

U-Boot-Users Paul Burrell 3 participants 5 messages Sep 7, 2006

lore
Share & tools
lore
#1 lore raw
Quoted 3 lines · --- Paul Burrell

Has anyone seen (or done) a port for the c6000 dsp family for Code Composer
(TI compiler)?

Why would you want to do that under Windoze?
it's easy enough to do with the ELDK (I'm doing it) and writing it to flash with flashwriter_nor.out...

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#2 lore raw

Frank,
What am I missing here? Sounds like you have some experience, so could you
answer a couple of questions.

First I should clarify a couple of things just in case I did not communicate them correctly.

The target is a TI TMS320C6204. It is a DSP from TI using a C64 core. It
is not one of the OMAPs with an embedded ARM. The normal GCC compiler set
does not appear to support the C6000 process, but I just found some documentation indicating that might not be true.

1. So I went to the ELDK page (DENX). According to the page, it only
supports PowerPC. I am going to download it and check, but that is all I see. I did see that they have ARM, PPC, and MIPS directories, so it might be more than PPC.
2. So lets say it does support it, what toolchain should I be looking at? Version numbers would be nice.

In the end, embedded linix is going to be more than what I need. I am just
trying to have a simple bootloader with the ability to edit memory, test functions, program flash, and load over a serial port. I don't even need networking capability.

Any advice would be great.

Thanks,
Paul

-----Original Message-----
From: Frank [mailto:frannk_m1 at yahoo.com]
Sent: Thursday, September 07, 2006 6:00 PM
To: paul at burrellhome.com; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] uboot for TI DSP c6000

Quoted 3 lines · --- Paul Burrell

Has anyone seen (or done) a port for the c6000 dsp family for Code Composer
(TI compiler)?

Why would you want to do that under Windoze?
it's easy enough to do with the ELDK (I'm doing it) and writing it to flash with flashwriter_nor.out...

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

#3 lore raw

Dear Paul,

Quoted 2 lines · in message <[email protected]> you wrote:

The target is a TI TMS320C6204. It is a DSP from TI using a C64 core. It

I am not aware of a port of U-Boot to such a processor. We ported Python to the 320c671x once, but that's a diferent story :-)

Quoted 4 lines

1. So I went to the ELDK page (DENX). According to the page, it only
supports PowerPC. I am going to download it and check, but that is all I see. I did see that they have ARM, PPC, and MIPS directories, so it might be more than PPC.

Right: the ELDK is available for ARM, MIPS and PowerPC, but does not support TI DSPs.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
My play was a complete success.  The audience was a failure.
#4 lore raw
Quoted 19 lines · --- Wolfgang Denk

Dear Paul,

Quoted 2 lines · in message <[email protected]> you wrote:

The target is a TI TMS320C6204. It is a DSP from TI using a

C64 core. It

I am not aware of a port of U-Boot to such a processor. We ported
Python to the 320c671x once, but that's a diferent story :-)

Quoted 1 line

1. So I went to the ELDK page (DENX). According to the

page, it only

Quoted 1 line

supports PowerPC. I am going to download it and check, but

that is all I

Quoted 1 line

see. I did see that they have ARM, PPC, and MIPS

directories, so it might

Quoted 1 line

be more than PPC.

Quoted 8 lines

Right: the ELDK is available for ARM, MIPS and PowerPC, but does not
support TI DSPs.

Best regards,

Wolfgang Denk

As uasual, Wolfgang's right, I'm wrong. Got it confused with the DM6446...

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com