(no subject)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Here is the error I get if I use the second DIMMS
U-Boot 1.1.4 (Jul 18 2006 - 07:36:20)
CPU: AMCC PowerPC 440GX Rev. F at 800 MHz (PLB=160, OPB=80, EBC=40
MHz)
I2C boot EEPROM enabled
Internal PCI arbiter enabled
32 kB I-Cache 32 kB D-Cache
Board: Ocotea - AMCC PPC440GX Evaluation Board I2C: ready DRAM: ERROR: Cannot determine a common read delay.
### ERROR ### Please RESET the board ###
Gerald
-----Original Message-----
From: Gerald Jackson
Sent: Friday, September 29, 2006 6:16 PM
To: Marc.Howard at KLA-Tencor.com; sr at denx.de;
u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] (no subject)
Marc,
After you make that change you can use both dimms slot on the ocotea board?
What error did you receive before the modification?
if I use only the second dimm slot with 256M it errors. if I use the first dimm slot it is ok and if I use both dimms slot it error as well.
I am using 1.1.4.
Gerald
-----Original Message-----
From: "Howard, Marc"<[email protected]>
Sent: 9/28/06 5:06:26 PM
To: "Stefan Roese"<[email protected]>,
"u-boot-users at lists.sourceforge.net"<[email protected]>
Subject: Re: [U-Boot-Users] (no subject)
Stefan,
Actually > 256MB won't work correctly. There is a problem in board/amcc/ocotea/init.S:
tlbtab:
tlbtab_start
tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1,
AC_R|AC_W|AC_X|SA_G|SA_I)
tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1,
AC_R|AC_W|SA_G|SA_I)
tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0,
AC_R|AC_W|AC_X )
tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0,
AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I
)
tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3,AC_R|AC_W|SA_G|SA_I )
tlbtab_en
The line:
tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
...should be...
tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
^
------------------------------------------------^
The way it currently stands virtual addresses 256-512MB are mapped into the same region as the 1st 256MB of SDRAM.
Marc Howard
Quoted 33 lines
-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Stefan Roese
Sent: Thursday, September 28, 2006 5:48 AM
To: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] (no subject)Hi Gerald,
Quoted 4 lines · Gerald Jackson
Does anyone know why u-boot 1.1.4 fails if you use two dimms in the Ocotea Amcc board?
I have try two 256 dimm, two 512 dimm, and one 256 dimm in
the second
Quoted 3 lines
slot ( nothing in the first slot) it all fails.
Is this a know problem with the Ocotea board?
No. IIRC, we have tested Ocotea with different DIMM modules. Which U-Boot
version are you using? What DIMM modules are you using? And what combination
_is_ working?A quick look at the TLB setup shows me, that a maximum of 512MBytes could be
working. For more at least the TLB setup has to be changed.Best regards,
Stefan
Quoted 8 lines
--------------------------------------------------------------
-----------
Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge
&CID=DEVDEV
Quoted 5 lines
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users
------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDE
V
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users