Skip to contentSkip to conversation

U Boot ethernet problem

U-Boot Marek Vasut 2 participants 2 messages Nov 3, 2010 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 000001cb7b5f$66ba3520$342e9f60$@com

#1 lore raw
Quoted 10 lines · On Wednesday 03 November 2010 14:59:55 Moshe Artzi wrote:

Hi Marek,

I finally running u boot on my PXA320 but,

I don't know why but,

Quoted 5 lines

When I'm sending ping from the u boot to the host it pings ok.

But when I'm trying to ping from the host to the u boot it lost.

That's why I'm not able to download an image to the u boot.

Because u-boot only starts the network chip for the time when it sends packets. It doesn't activelly wait for pings (the chip is off), that's why it doesn't react.

It's not the reason why you're not able to download the image. The fact it pings means the network chip works. What command do you use to download the image?

Quoted 30 lines

Any ideas ?

Thanks,

Moshe Artzi

Software engineer

Niron systems

Tel : 09-7407626

Ex : 104

Fax: 09-8651510

Mobile : 050-3356312

Email : <mailto:[email protected]> Moshe_a at niron-sys.com

Site: <http://www.niron-sys.com/> www.niron-sys.com

#2 lore raw

I have tried :tftp , dhcp , tftpboot.
Using tftpd32 server application

-----Original Message-----
From: Marek Vasut [mailto:marek.vasut at gmail.com]
Sent: Wednesday, November 03, 2010 4:29 PM
To: Moshe Artzi
Cc: 'Gena Chap'; u-boot at lists.denx.de; openocd-development at lists.berlios.de
Subject: Re: U Boot ethernet problem

Quoted 10 lines · On Wednesday 03 November 2010 14:59:55 Moshe Artzi wrote:

Hi Marek,

I finally running u boot on my PXA320 but,

I don't know why but,

Quoted 5 lines

When I'm sending ping from the u boot to the host it pings ok.

But when I'm trying to ping from the host to the u boot it lost.

That's why I'm not able to download an image to the u boot.

Because u-boot only starts the network chip for the time when it sends packets.
It doesn't activelly wait for pings (the chip is off), that's why it doesn't

react.

It's not the reason why you're not able to download the image. The fact it pings
means the network chip works. What command do you use to download the image?

Quoted 30 lines

Any ideas ?

Thanks,

Moshe Artzi

Software engineer

Niron systems

Tel : 09-7407626

Ex : 104

Fax: 09-8651510

Mobile : 050-3356312

Email : <mailto:[email protected]> Moshe_a at niron-sys.com

Site: <http://www.niron-sys.com/> www.niron-sys.com