Problem Exporting Symbol
A message that is not in the archive (sent off-list or not yet received): [email protected]
I haven't checked the actual sources, but I bet 'va_to_pte' is _not_ a symbol... it is probably either an "inline" function so the compiler inserts the function's code everywhere it is "called" (saves the overhead of the call and return with associated stack pushing and popping). When you try to export it, it isn't found.
Solutions:
1) Write your own non-inline "my_va_to_pte" in the kernel and export it.
2) Figure out how to avoid "va_to_pte" in your driver?
3) Don't make your SPI driver a loadable module?
3) Other?
4) Don't inline "va_to_pte" (BAD SOLUTION).
gvb
Quoted 13 lines · At 07:25 PM 1/21/2003 -0500, [email protected] wrote:
Hi All,
I am trying to write SPI driver for 8260, based on the SPI driver for
the MPC860 that I got from this list. I am trying to export the symbol 'va_to_pte', for the driver module, in the kernel.I included this in
arch/ppc/kernel/ppc_ksyms.c, by using theEXPORT_SYMTAB(va_to_pte)function. But when I tried to rebuild the kernel (make zImage), it keeps coming back with the following error:arch/ppc/kernel/kernel.o(__ksymtab+0x0370): undefined reference to '
va_to_pte'
Quoted 9 lines
I have exported other symbols, by following similar procedure. Is there
something that I am missing.I am running Linux kernel 2.4.2. Any inputs will be very helpful.
Thanks and Regards,
Shiv
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/