Skip to contentSkip to conversation

Switching from LCD to external video w/ no external video connected causes deadlock

BUG Shawn Starr 1 participant 2 messages Jul 29, 2004 – Aug 13, 2005 2 messages not in the archive

lore
Share & tools
lore
#0 lore raw

I've noticed a few people with IBM Thinkpads running 2.6.7+ - different models - have this problem. I don't know where in 2.6 this begin happening though.

When you use the function key and switch from LCD to External Video, the system deadlocks.
While ssh'd into the laptop the system has deadlocked once I switched video. Unfortunately, I don't have a USB <-> Serial dongle handy yet ;-)

The Video card is a ATI Radeon 9600 64MB RAM, kernel has no framebuffer support enabled.

Is this a known issue?

Thanks.

Shawn.

#3 lore raw

Re: [BUG][2.6.7+(or eariler)] Switching from LCD to external video w/ no external video connected causes deadlock - Regression

In reply to a message not in the archive

We're back to square one, in VT mode the system deadlocks once again when switching between LCD, External video modes.

Kernel: 2.6.13-rc5 (merucurial build August 2nd snapshot).

Looks like this bug needs to be reopened again :/

Shawn.

Quoted 38 lines · Shawn Starr

As of 2.6.9 in Linux console, it properly switches between modes, there is a small delay when switching to external VGA (if you have sound playing it will repeat for a moment then resume). There is no deadlocks.

I cant test inside X just yet (w/ Xinerama extension)

Shawn.

Quoted 29 lines · Andrew Morton

Is this still happening in current kernels?

Thanks.

Quoted 24 lines · Shawn Starr

I've noticed a few people with IBM Thinkpads running 2.6.7+ - different models - have this problem. I don't know where in 2.6 this begin happening though.

When you use the function key and switch from LCD to External Video, the system deadlocks.
While ssh'd into the laptop the system has deadlocked once I switched video. Unfortunately, I don't have a USB <-> Serial dongle handy yet ;-)

The Video card is a ATI Radeon 9600 64MB RAM, kernel has no framebuffer support enabled.

Is this a known issue?

Thanks.

Shawn.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/