Skip to contentSkip to conversation

access to terminal server in DMZ with 2 isp

DISCUSSION alfredo 3 participants 3 messages Oct 20, 2009 – Oct 23, 2009

lore
Share & tools
lore

alfredo

author
#0 lore raw

I have been trying to configure access to a terminal server from several days without any luck. I have two routers from 2 diferrent isp

(called ono and neo) with a range of public in each. I want to access my terminal server from internet from each isp, so as if one is down I

can use the other one.

/-------\ neo(isp1) eth1 +----------+
/ \ +----+ | +-----------------+

/ Internet |------------|    | Firewall |---eth0-+-- DMZ -| Terminal Server |
\          /            +----+          | +-----------------+

\--------/ ono (isp2) eth2 +----------+

IP1 is the public ip of eth1
P1 is the ip of the neo's router
IP2 is the public ip of eth2
P2 is the ip of the ono's router

My script to configure the firewall is as follows:
#eth0 -> Internal network (DMZ) 192.168.0.0/24 #eth1 -> Neo (First ISP)
#eth2 -> Ono (Second ISP)
set -x#Script:

echo 255 local > /etc/iproute2/rt_tables echo 254 main >> /etc/iproute2/rt_tables echo 253 default >> /etc/iproute2/rt_tables echo 0 unspec >> /etc/iproute2/rt_tables echo 200 neo >> /etc/iproute2/rt_tables echo 201 ono >> /etc/iproute2/rt_tables

iptables -F
iptables -t nat -F
iptables -t mangle -F

# neo
IP1="213.172.XXXX"
P1_NET="213.172.XXXX/29"
P1="213.172.XXXX"
IF1="eth1"

# ono
IP2="84.124.XXXXX"
P2_NET="84.124.87.224/29"
P2="84.124.XXXX"
IF2="eth2"
IP0="192.168.0.249"
P0_NET="192.168.0.0/24"
#P0=
IF2="eth0"

ip route add $P2_NET dev $IF2 src $IP2 table ono ip route add default via $P2 table ono ip route add $P1_NET dev $IF1 src $IP1 table neo ip route add default via $P1 table neo ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip route add default via $P1
ip route add $P0_NET dev $IF0 table neo
ip route add $P2_NET dev $IF2 table neo
ip route add 127.0.0.0/8 dev lo table neo
ip route add $P0_NET dev $IF0 table ono
ip route add $P1_NET dev $IF1 table ono
ip route add 127.0.0.0/8 dev lo table ono

ip rule add fwmark 2 table ono ip rule add fwmark 1 table neo ip rule add from $IP2 table ono ip rule add from $IP1 table neo # -----------
echo 1 > /proc/sys/net/ipv4/ip_forward iptables -F
iptables -t nat -F
iptables -t mangle -F

#iptables -t mangle -A PREROUTING -m conntrack --ctstate
DNAT --ctorigdst $IP1 -j MARK --set-mark 1

               #iptables -t mangle -A PREROUTING -m conntrack --ctstate 
DNAT --ctorigdst $IP2 -j MARK --set-mark 2
               iptables -t mangle -A PREROUTING -m conntrack --ctorigdst 
$IP1 -j MARK --set-mark 1
               iptables -t mangle -A PREROUTING -m conntrack --ctorigdst 

$IP2 -j MARK --set-mark 2

# Habilito el NAT para que la red interna pueda salir iptables -t nat -A POSTROUTING -o $IF1 -s $P0_NET -d
0.0.0.0/0 -j SNAT --to $IP1
iptables -t nat -A POSTROUTING -o $IF2 -s $P0_NET -d
0.0.0.0/0 -j SNAT --to $IP2

               #iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 

0.0.0.0/0 -j MASQUERADE
# Redirecciono el puerto de las publicas a la privada iptables -A PREROUTING -t nat -p tcp -i eth2 --dport 3389 -j
DNAT --to 192.168.0.118:3389

               iptables -A PREROUTING -t nat -p tcp -i eth1 --dport 3389 -j 
DNAT --to 192.168.0.118:3389
               #iptables -A PREROUTING -t nat -p tcp --dport 3389 -j 
DNAT --to 192.168.0.118:3389
               #iptables -A PREROUTING -t nat -p tcp --dport 6000 -j 

DNAT --to 192.168.0.118:6666

When I try to connect from outside to each of my isps, for example ono, I see packets entering eth2 and then going out eth2 immediately without being routed to eth0.
I see dnat has changed the destination ip so packets go out eth2 having the source ip from which I'm connecting from (not the ip of the

adapter) and destination ip 192.168.0.118 (the internal server) but through the wrong interface.
These packets should have being sent by eth0 and not eth2. If I connect to the other isp, neo, it's the same but packets going out eth1 instead of eth0.
Any suggestions?

#1 lore raw
Quoted 126 lines

I have been trying to configure access to a terminal server from several
days without any luck. I have two routers from 2 diferrent isp

(called ono and neo) with a range of public in each. I want to access my
terminal server from internet from each isp, so as if one is down I

can use the other one.

/-------\ neo(isp1) eth1 +----------+
/ \ +----+ |

+-----------------+
/ Internet |------------|    | Firewall |---eth0-+-- DMZ -| Terminal
Server
|
\          /            +----+          |
+-----------------+
 \--------/  ono (isp2) eth2 +----------+

IP1 is the public ip of eth1
P1 is the ip of the neo's router
IP2 is the public ip of eth2
P2 is the ip of the ono's router

My script to configure the firewall is as follows:
#eth0 -> Internal network (DMZ) 192.168.0.0/24 #eth1 -> Neo (First ISP)
#eth2 -> Ono (Second ISP)
set -x#Script:

echo 255 local > /etc/iproute2/rt_tables echo 254 main >> /etc/iproute2/rt_tables echo 253 default >> /etc/iproute2/rt_tables echo 0 unspec >> /etc/iproute2/rt_tables echo 200 neo >> /etc/iproute2/rt_tables echo 201 ono >> /etc/iproute2/rt_tables

iptables -F
iptables -t nat -F
iptables -t mangle -F

# neo
IP1="213.172.XXXX"
P1_NET="213.172.XXXX/29"
P1="213.172.XXXX"
IF1="eth1"

# ono
IP2="84.124.XXXXX"
P2_NET="84.124.87.224/29"
P2="84.124.XXXX"
IF2="eth2"
IP0="192.168.0.249"
P0_NET="192.168.0.0/24"
#P0=
IF2="eth0"

ip route add $P2_NET dev $IF2 src $IP2 table ono ip route add default via $P2 table ono ip route add $P1_NET dev $IF1 src $IP1 table neo ip route add default via $P1 table neo ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip route add default via $P1
ip route add $P0_NET dev $IF0 table neo
ip route add $P2_NET dev $IF2 table neo
ip route add 127.0.0.0/8 dev lo table neo
ip route add $P0_NET dev $IF0 table ono
ip route add $P1_NET dev $IF1 table ono
ip route add 127.0.0.0/8 dev lo table ono

ip rule add fwmark 2 table ono ip rule add fwmark 1 table neo ip rule add from $IP2 table ono ip rule add from $IP1 table neo # -----------
echo 1 > /proc/sys/net/ipv4/ip_forward iptables -F
iptables -t nat -F
iptables -t mangle -F

#iptables -t mangle -A PREROUTING -m conntrack --
ctstate
DNAT --ctorigdst $IP1 -j MARK --set-mark 1
#iptables -t mangle -A PREROUTING -m conntrack --
ctstate
DNAT --ctorigdst $IP2 -j MARK --set-mark 2
iptables -t mangle -A PREROUTING -m conntrack --
ctorigdst
$IP1 -j MARK --set-mark 1
iptables -t mangle -A PREROUTING -m conntrack --
ctorigdst
$IP2 -j MARK --set-mark 2

# Habilito el NAT para que la red interna pueda salir iptables -t nat -A POSTROUTING -o $IF1 -s $P0_NET -d
0.0.0.0/0 -j SNAT --to $IP1
iptables -t nat -A POSTROUTING -o $IF2 -s $P0_NET -d
0.0.0.0/0 -j SNAT --to $IP2

                #iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d

0.0.0.0/0 -j MASQUERADE
# Redirecciono el puerto de las publicas a la privada iptables -A PREROUTING -t nat -p tcp -i eth2 --dport
3389 -j
DNAT --to 192.168.0.118:3389

                iptables -A PREROUTING -t nat -p tcp -i eth1 --dport
3389 -j
DNAT --to 192.168.0.118:3389
                #iptables -A PREROUTING -t nat -p tcp --dport 3389 -j
DNAT --to 192.168.0.118:3389
                #iptables -A PREROUTING -t nat -p tcp --dport 6000 -j

DNAT --to 192.168.0.118:6666

When I try to connect from outside to each of my isps, for example ono, I
see packets entering eth2 and then
going out eth2 immediately without being routed to eth0.
I see dnat has changed the destination ip so packets go out eth2 having the
source ip from which I'm connecting from (not the ip of the

Quoted 10 lines

adapter) and destination ip 192.168.0.118 (the internal server) but through
the wrong interface.
These packets should have being sent by eth0 and not eth2. If I connect to
the other isp, neo, it's the same but packets going out eth1
instead of eth0.
Any suggestions?

We did something similar for a client a few years back. The only difference is that we used two IP's for the terminal server and for the NAT we NAT'd provider1 IP to terminal server IP1, and provider2 IP to terminal server IP2. We used a similar script for handling the routes and mark's as well.

The only problem we ran into, which we did later fix, is that we had to fight with the default gateway (if router 1 when down then the route on router 2 didn't seem to work well). We did fix that, but I can't remember how for sure. The key was assigning multiple internal IP's to the terminal server so there was no confusion on default route on the PRE/POST ROUTING.

Hope that helps.

#2 lore raw
In reply to alfredo

Hi,

It's definitely a routing problem as you see and you have probably noticed it already..

You are using fwmark to send packets to your spacial tables but it seems that your local network is missing inside neo and ono tables.

Please verify the by:
ip route show table ono
ip route show table neo

Quoted 6 lines
               # neo
               IP1="213.172.XXXX"
               P1_NET="213.172.XXXX/29"
               P1="213.172.XXXX"
               IF1="eth1"
Quoted 9 lines
               # ono
               IP2="84.124.XXXXX"
               P2_NET="84.124.87.224/29"
               P2="84.124.XXXX"
               IF2="eth2"
               IP0="192.168.0.249"
               P0_NET="192.168.0.0/24"
               #P0=
               IF2="eth0"
                 ^^^^^^^^^^

Seems like typo should be IF0="eth0"

Quoted 22 lines

ip route add $P2_NET dev $IF2 src $IP2 table ono ip route add default via $P2 table ono ip route add $P1_NET dev $IF1 src $IP1 table neo ip route add default via $P1 table neo ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip route add default via $P1
ip route add $P0_NET dev $IF0 table neo
ip route add $P2_NET dev $IF2 table neo
ip route add 127.0.0.0/8 dev lo table neo
ip route add $P0_NET dev $IF0 table ono
ip route add $P1_NET dev $IF1 table ono
ip route add 127.0.0.0/8 dev lo table ono

ip rule add fwmark 2 table ono
ip rule add fwmark 1 table neo
ip rule add from $IP2 table ono
ip rule add from $IP1 table neo
# -----------

Quoted 6 lines

When I try to connect from outside to each of my isps, for example ono, I see packets entering eth2 and then
going out eth2 immediately without being routed to eth0.
I see dnat has changed the destination ip so packets go out eth2 having the source ip from which I'm connecting from (not the ip of the

Everything else seems to be correct to me..

Regarsd,
Vlado