Problem with compiled u-boot on Atmel ngw100 board
I'm having trouble getting a binary that I've compiled to work on the Atmel ngw100 board. I can use the provided binary from Atmel's site but if I compile my own from the u-boot-2008.10 or u-boot-2009.11 source, I get exceptions. And just in case someone asks..I can't use the binary because we have a custom board which is close to the ngw100 but not the same (I just using the ngw100 to get things setup).
I'm sure this must have something to do with my environment setup, but I can't seem to figure it out.
I would be grateful for any help! Thanks!
Steve
Here's what I'm using for gcc and OS (Ubuntu) -
# avr32-gcc -v
Using built-in specs.
Target: avr32
Configured with: ../../gcc-4.3.2-atmel.1.0.1/configure none
Thread model: single
gcc version 4.3.2 (GCC)
#
# uname -a
Linux steve-desktop 2.6.27-16-generic #1 SMP Tue Dec 1 17:56:54 UTC 2009 i686 GNU/Linux
#
This is what I setup when going to build -
CROSS_COMPILE=avr32-
export CROSS_COMPILE
make atngw100_config
make
Everything seems fine during the build. Then this is the output from a board.
U-Boot 2009.11 (Jan 05 2010 - 22:27:36)
U-Boot code: (null) -> 00012e9a data: 00019ed8 -> 0004e9c8
DMA: Using memory from 0x11f6d000 to 0x11f71000
Flash: 3.2 GB at address 0x00000000
DRAM Configuration:
Bank #0: 10000000 32 MB
WARNING: Cannot allocate space for boot parameters
*** Warning - bad CRC, using default environment
*** Unhandled exception 8 at PC=0xc040c040
pc: c040c040 lr: 11fb9494 sp: 11f6cf44 r12: c040c040
r11: c86cbfd4 r10: c86cbfd4 r9: 00000002 r8: 00000001
r7: c86cbfd4 r6: 11fcbda4 r5: 11f6cfa8 r4: 00000001
r3: c86cbfd4 r2: c86cbfd4 r1: 0001ada4 r0: 11fb0fff
Flags: qvNzc
Mode bits: hrje....g
CPU Mode: Supervisor
Stack: (0x11f6cf44 to 0x11f6cfa8)
cf40: 11fb96bc 11f6cfd4 11fcbda4 11f6cfa8 11f6cfa8 11fb171411f6cfd4
cf60: 11fcbda4 11f6cfa8 11f6cfa8 11f6cfd4 0001adac 0001ada4 11fb0fff 11fb1180
cf80: 02000000 11fcbda4 24007fb4 00000001 043cce13 11fb1000 00000000 11fb0fff
cfa0: 00000000 00000000
Unhandled exception