Skip to contentSkip to conversation

Problem in running "ls" command

U-Boot-Users Pankaj GOYAL 2 participants 2 messages Mar 7, 2005

lore
Share & tools
lore
#0 lore raw

HI,
I m using u-boot on my board which is based on the arm926ejs and my board has a support of 32MB nand flash of STMicroelectronics.I Have created 4 partitions (3MB + 7MB+ 10MB + 12 MB = 32MB )on my nand flash using uboot.I have made a jffs2 image(containing kernel.uimg and initrd.gz.uimg) the for my nand flash and written the jffs2 image on the first partition of nand using the u-boot.I have also given the jffs2 support for NAND in my u-boot.When I use the "ls" command first time it shows the images (kernel.uimg and initrd.gz.uimg)in the partition correctly.I m able to load the files in the memory using the "fsload" command and able to boot the kernel.But if I run the "ls" command more then one time I got the following error
"get_fl_mem: can't alloc 68 bytes
"get_fl_mem: can't alloc 68 bytes
"get_fl_mem: can't alloc 68 bytes
.......
many times and it does not show the files in the partition and I m unable to load the files in the memory.
Can some one please tell me what can be the problem.

Regards
pankaj

#1 lore raw
Quoted 2 lines · In message <[email protected]> you wrote:

I m using u-boot on my board which is based on the arm926ejs and my

Is this the latest version of U-Boot, i. e. top of tree in CVS?

Quoted 7 lines

"get_fl_mem: can't alloc 68 bytes
"get_fl_mem: can't alloc 68 bytes
"get_fl_mem: can't alloc 68 bytes
.......
many times and it does not show the files in the partition and I m unable to load the files in the memory.
Can some one please tell me what can be the problem.

Did you try to increase the size of the malloc area (CFG_MALLOC_LEN) ?

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You said you  didn't  want  to  use  CGI.pm,  but  methinks  you  are
needlessly reinventing the wheel, one spoke at a time. Either you are
masochistic,  or  you  just haven't seen enough of what CGI.pm can do
for you. -- Randal L. Schwartz in <[email protected]>