Skip to contentSkip to conversation

SFQ limit parameter?

LARTC Matthias Lendholt 2 participants 2 messages Jun 5, 2004

lore
Share & tools
lore
#0 lore raw

Hi list
In chapter 9.2.3.1 of the lartc Howto the paramters of the SFQ (stochastic fairness queuing) are listed and one parameter is 'limit'. I tried to use this parameter like this:

tc qdisc add dev $DEV parent 1:30 handle 30: sfq perturb 10 limit 16

And I got:

What is "limit"?
Usage: ... sfq [ perturb SECS ] [ quantum BYTES ]

It seems that this parameter doesn't exist. Is this known?

bye,
Matthias Lendholt
[Berlin, Germany]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Am Saturday 05 June 2004 11:40 schrieb Matthias Lendholt:

Quoted 4 lines

What is "limit"?
Usage: ... sfq [ perturb SECS ] [ quantum BYTES ]

It seems that this parameter doesn't exist. Is this known?

Ah, well, it kind of does exist, but it is not dynamic, it is instead hardcoded into the kernel. Compile SFQ as a module and change the queue length there. It's a define at the top of the file, default value is 128.

HTH
Andreas
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/