Skip to contentSkip to conversation

how to set active partition in the u-boot?

U-Boot-Users thomas.luo 2 participants 3 messages Dec 13, 2006 – Dec 14, 2006

lore
Share & tools
lore

thomas.luo

author
#0 lore raw

hi,all
how to set active partition in the u-boot?
the problem:
i'm partion the nand to 3 partions. and the second partion is the jffs file system.
how do i set the active partition to 2?
thanks

Br
Thomas

#1 lore raw
Quoted 2 lines · In message <000501c71e8f$f2e02180$0a01000a@Thomas> you wrote:

how to set active partition in the u-boot?

chpart?

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Der Dativ ist dem Genitiv sein Tod.
author
#2 lore raw

----- Original Message -----
From: "Wolfgang Denk" <[email protected]>
To: "thomas.luo" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, December 14, 2006 3:19 AM
Subject: Re: [U-Boot-Users] how to set active partition in the u-boot?

Quoted 14 lines
Quoted 2 lines · In message <000501c71e8f$f2e02180$0a01000a@Thomas> you wrote:

how to set active partition in the u-boot?

chpart?

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Der Dativ ist dem Genitiv sein Tod.

thanks, can i use the MACRO to set default? every time i need set by hand.
and an patch uploaded............

----------------------------------------------------------

----- Original Message -----
From: "thomas.luo" <[email protected]>
To: <[email protected]>
Sent: Thursday, December 14, 2006 1:16 PM
Subject: [PATCH] for u-boot 1.1.6 nand IDS

Quoted 10 lines

Dear All:
i found an bug in the u-boot when using 512MiB NAND flash.
there have two type of flash defined it's ID as 0xDC. But In the MTD driver, the smallblock is abandoned.

BR

Thomas
here list the patch.
----------------------------------------------------------------------------

drivers/nand/nand_ids.c 2006-12-14 10:12:13.000000000 +0800 renamed from drivers/nand/nand_ids.c 2006-12-01 17:49:32.000000000 +0800 +0 -2
@@ -67,8 +67,6 @@ struct nand_flash_dev nand_flash_ids[] =
 
  {"NAND 256MiB 3,3V 8-bit",  0x71, 512, 256, 0x4000, 0},
 
- {"NAND 512MiB 3,3V 8-bit",  0xDC, 512, 512, 0x4000, 0},
-
  /* These are the new chips with large page size. The pagesize
  * and the erasesize is determined from the extended id bytes
  */