Skip to contentSkip to conversation

watchdog: s3c2410_wdt: use dev_err()/dev_info() instead of pr_err()/pr_info()

PATCH RESEND In review Jingoo Han 2 participants 2 messages Apr 29, 2013

Subsystems (2)
lore
Share & tools
lore

Jingoo Han

author
#0 lore raw

PATCH RESEND 1/2 watchdog: s3c2410_wdt: use dev_err()/dev_info() instead of pr_err()/pr_info()

dev_err()/dev_info() are more preferred than pr_err()/pr_info().

---
 drivers/watchdog/s3c2410_wdt.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
drivers/watchdog/s3c2410_wdt.c +2 -2
index ee03135..c9f480d 100644
@@ -349,7 +349,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 
 	ret = s3c2410wdt_cpufreq_register();
 	if (ret < 0) {
-		pr_err("failed to register cpufreq\n");
+		dev_err(dev, "failed to register cpufreq\n");
 		goto err_clk;
 	}
 
@@ -464,7 +464,7 @@ static int s3c2410wdt_resume(struct platform_device *dev)
 	writel(wtdat_save, wdt_base + S3C2410_WTCNT); /* Reset count */
 	writel(wtcon_save, wdt_base + S3C2410_WTCON);
 
-	pr_info("watchdog %sabled\n",
+	dev_info(&dev->dev, "watchdog %sabled\n",
 		(wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
 
 	return 0;
Signature · 1 line
1.7.2.5