Skip to contentSkip to conversation

scsi: replace strict_strtoul() with kstrtoul()

PATCH New Jingoo Han 1 participant 1 message Jul 19, 2013

Subsystems (2)
lore
Share & tools
lore

Jingoo Han

author
#0 lore raw

PATCH 1/1 scsi: replace strict_strtoul() with kstrtoul()

The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used.

---
 drivers/scsi/pmcraid.c    |    6 ++++--
 drivers/scsi/scsi_sysfs.c |    6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)
drivers/scsi/pmcraid.c +4 -2
index 1eb7b028..8cd98e6 100644
@@ -4203,9 +4203,11 @@ static ssize_t pmcraid_store_log_level(
 	struct Scsi_Host *shost;
 	struct pmcraid_instance *pinstance;
 	unsigned long val;
+	int ret;
 
-	if (strict_strtoul(buf, 10, &val))
-		return -EINVAL;
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
 	/* log-level should be from 0 to 2 */
 	if (val > 2)
 		return -EINVAL;
drivers/scsi/scsi_sysfs.c +4 -2
index 7e50061..a876e9b 100644
@@ -819,9 +819,11 @@ sdev_store_queue_ramp_up_period(struct device *dev,
 {
 	struct scsi_device *sdev = to_scsi_device(dev);
 	unsigned long period;
+	int ret;
 
-	if (strict_strtoul(buf, 10, &period))
-		return -EINVAL;
+	ret = kstrtoul(buf, 10, &period);
+	if (ret)
+		return ret;
 
 	sdev->queue_ramp_up_period = msecs_to_jiffies(period);
 	return period;
Signature · 1 line
1.7.10.4