Router serving several inet ips
Hi all,
i have a router with debian 3.0 kernel 2.4.20, working with htb quite well, limiting bandwidth and doing port and ip priorizations.
Now i want to server more than 1 internet ip, later i will do priorizations on each ip.. but.. i can´t manage yet the first thing.
The idea is that it works as a "dhcp server", assigning the ips.. but the traffic must go through the linux box (so i can priorize and limit bandwidth).
i have set up the second internet ip with ipalias in eth1:0, and it is active, i get ping from internet.. no problem.. but it does not work fine when i try to assign it to a private ip
The idea is assigning 192.168.0.3 to eth1:0 (no natting, .. just the entire ip)
The iptables after '#' is what i tried.. but it did not work, it gave me this message:
debian:/etc/init.d# sh nat.sh Warning: weird character in interface `eth1:0' (No aliases, :, ! or *). Warning: weird character in interface `eth1:0' (No aliases, :, ! or *). iptables v1.2.7a: multiple -j flags not allowed
Thanks in advance,
Carlos
The script, below..
#!/bin/sh
echo "AthoS LaN Generando iptables..." > /dev/tty12
#limpiamos las tablas de iptables
iptables -F
iptables -t nat -F
iptables -t filter -F
#eth1 sera la interfaz de internet
iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
#eth0 la interfaz de la red local
iptables --append FORWARD --in-interface eth0 -j ACCEPT
#iptables -t nat -F PREROUTING
#iptables -t nat -P PREROUTING ACCEPT
#iptables -t nat -F POSTROUTING
#iptables -t nat -P POSTROUTING ACCEPT
#iptables -t nat -A POSTROUTING -o eth1:0 #iptables -A FORWARD -i eth0 -j ACCEPT -m state --state NEW,ESTABLISHED,RELATED
#iptables -A FORWARD -i eth1:0 -j ACCEPT -m state --state ESTABLISHED,RELATED -j MASQUERADE
#activamos el forward
echo 1 > /proc/sys/net/ipv4/ip_forward
#reglas para enrutado de paketes...
#1.- redirecciona las peticiones del puerto 21 a mi pc
iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 21 -j DNAT --to 192.168 .0.2:21
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Carlos,
Quoted 7 lines
The iptables after '#' is what i tried.. but it did not work, it gave me this message:
debian:/etc/init.d# sh nat.sh Warning: weird character in interface `eth1:0' (No aliases, :, ! or *). Warning: weird character in interface `eth1:0' (No aliases, :, ! or *). iptables v1.2.7a: multiple -j flags not allowed
Quoted 5 lines
#iptables -t nat -A POSTROUTING -o eth1:0 #iptables -A FORWARD -i eth0 -j ACCEPT -m state --state NEW,ESTABLISHED,RELATED
#iptables -A FORWARD -i eth1:0 -j ACCEPT -m state --state ESTABLISHED,RELATED -j MASQUERADE
You need to fix those 3 lines just like the error messages say. Iptables uses the real interface (eth1) not the aliased one.
and you can't combine two -j flags ACCEPT and MASQUERADE. I assume the -j MASQUERADE option is a mistake and should belong elsewhere.
Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/