ppp+vpn+htb
please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection,
how to build root tc rule, when I have more then one interface?... please any one width experiance
regards
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi mail.cat-net.co.yu,
Because ppp traffic is over your real network link, you can control ppp traffic over that physic device. But I think it have limitation, because with this way you can't look into the ppp layer and differential TCP/IP applications encapsulated in ppp layer.
Quoted 5 lines · mail.cat-net.co.yu
please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection,
how to build root tc rule, when I have more then one interface?... please any one width experiance
regards
Signature · 6 lines
lark _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi Wang,...
Quoted 4 lines
Because ppp traffic is over your real network link, you can control ppp traffic over that physic device. But I think it have limitation, because with this way you can't look into the ppp layer and differential TCP/IP applications encapsulated in ppp layer
yes, that is my question, if I control eth0 only, I can not have per user limmiting...
can I do something simple like this:
/sbin/tc qdisc add dev eth0 root handle 1: htb default 10 /sbin/tc class add dev eth0 parent 1: classid 1:1 htb rate 256kbit
/sbin/tc class add dev ppp0 parent 1:1 classid 1:10 htb rate 32kbit ceil \
256kbit prio 1 burst 64kbit cburst 96kbit/sbin/tc filter add dev ppp0 protocol ip parent 1:0 prio 1 u32 match ip dest \
$REMOTEIP0 folow 1:10
/sbin/tc class add dev ppp1 parent 1:1 classid 1:20 htb rate 32kbit ceil \
256kbit prio 1 burst 64kbit cburst 96kbit/sbin/tc filter add dev ppp1 protocol ip parent 1:0 prio 1 u32 match ip dest \
$REMOTEIP1 folow 1:20
...
or IMQ must be involved...
there must be way, to do bandwidth sharing throught vpn-ppp connections
thanks
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi hiphin,
It seems that your network link is eth0. Then
tc qdisc add dev eth0 root handle 1: htb default 10
tc class add dev eth0 parent 1: classid 1:1 htb rate 256kbit tc class add dev eth0 parent 1:1 classid 1:2 htb rate 32kbit ceil 256kbit prio 1
Then you can use tc filter to classify all pptp traffic to 1:2. You don't need to specify different class for every ppp connection.
But the drawback is no fairness. Not all ppp connections can get 32kbit assured if they want.
If you need guaranteed bandwidth for each ppp connection, try my per flow control queue patch. You can find it in list's archive.
Quoted 35 lines · hiphin
Hi Wang,...
Quoted 4 lines
Because ppp traffic is over your real network link, you can control ppp traffic over that physic device. But I think it have limitation, because with this way you can't look into the ppp layer and differential TCP/IP applications encapsulated in ppp layer
yes, that is my question, if I control eth0 only, I can not have per user limmiting...
can I do something simple like this:
/sbin/tcqdisc add dev eth0 root handle 1: htb default 10/sbin/tcclass add dev eth0 parent 1: classid 1:1 htb rate 256kbit
/sbin/tcclass add dev ppp0 parent 1:1 classid 1:10 htb rate 32kbit ceil \
256kbit prio 1 burst 64kbit cburst 96kbit/sbin/tcfilter add dev ppp0 protocol ip parent 1:0 prio 1 u32 match ip dest\ $REMOTEIP0 folow 1:10
/sbin/tcclass add dev ppp1 parent 1:1 classid 1:20 htb rate 32kbit ceil \
256kbit prio 1 burst 64kbit cburst 96kbit/sbin/tcfilter add dev ppp1 protocol ip parent 1:0 prio 1 u32 match ip dest\ $REMOTEIP1 folow 1:20...
or IMQ must be involved...
there must be way, to do bandwidth sharing throught vpn-ppp connectionsthanks
Signature · 6 lines
lark _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi hiphin,
You can also look into ESFQ. Corey Hickey releases esfq for 2.6.12-rc1.
Quoted 65 lines · Wang Jian
Hi hiphin,
It seems that your network link is eth0. Then
tc qdisc add dev eth0 root handle 1: htb default 10
tc class add dev eth0 parent 1: classid 1:1 htb rate 256kbit tc class add dev eth0 parent 1:1 classid 1:2 htb rate 32kbit ceil 256kbit prio 1Then you can use tc filter to classify all pptp traffic to 1:2. You don't need to specify different class for every ppp connection.
But the drawback is no fairness. Not all ppp connections can get 32kbit assured if they want.
If you need guaranteed bandwidth for each ppp connection, try my per flow control queue patch. You can find it in list's archive.
Quoted 35 lines · hiphin
Hi Wang,...
Quoted 4 lines
Because ppp traffic is over your real network link, you can control ppp traffic over that physic device. But I think it have limitation, because with this way you can't look into the ppp layer and differential TCP/IP applications encapsulated in ppp layer
yes, that is my question, if I control eth0 only, I can not have per user limmiting...
can I do something simple like this:
/sbin/tcqdisc add dev eth0 root handle 1: htb default 10/sbin/tcclass add dev eth0 parent 1: classid 1:1 htb rate 256kbit
/sbin/tcclass add dev ppp0 parent 1:1 classid 1:10 htb rate 32kbit ceil \
256kbit prio 1 burst 64kbit cburst 96kbit/sbin/tcfilter add dev ppp0 protocol ip parent 1:0 prio 1 u32 match ip dest\ $REMOTEIP0 folow 1:10
/sbin/tcclass add dev ppp1 parent 1:1 classid 1:20 htb rate 32kbit ceil \
256kbit prio 1 burst 64kbit cburst 96kbit/sbin/tcfilter add dev ppp1 protocol ip parent 1:0 prio 1 u32 match ip dest\ $REMOTEIP1 folow 1:20...
or IMQ must be involved...
there must be way, to do bandwidth sharing throught vpn-ppp connectionsthanks
Signature · 6 lines
lark _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Signature · 6 lines
lark _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Wang, hi, little of thinking and listen what I found logical
Q1: Is ppp interface, as only one connection on my real eth0 ?
If answare is YES, then simple SFQ on eth0 is good ?
...and main difference SFQ/ESFQ is that SFQ watching connections, and ESFQ watching host IP...
Q2: I have 2.4.xx, kernel ESFQ is for 2.6 kernel only ?
I need to limit max bandwidth for all users and fair share, do not need to have guaranteed-minimum
mathematic is simple: N*user <= 256kbps
soo if I have one user on vpn, hi gets 256kbps
if I have 2 users on vpn downloading, both is getting max 128kbps and soo on...
(this is too simple to be ...)
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Hi hiphin,
Quoted 7 lines · hiphin
Wang, hi, little of thinking and listen what I found logical
Q1: Is ppp interface, as only one connection on my real eth0 ?
If answare is YES, then simple SFQ on eth0 is good ?
...and main difference SFQ/ESFQ is that SFQ watching connections, and ESFQ watching host IP...
You didn't tell if you use pptp, but I think you use pptp.
ppp interface in this case is a peusdo network interface, under it there is IP connection between client and server. So your control the ip connection's rate, and then you can control the ppp interface.
So if you want fairness amongst these interfaces, you can either enforce fairness on connection ( 1 client only has 1 ppp connection) or enforce fairness on host (1 client may have multiple ppp connection but you take the client as one)
Quoted 5 lines
Q2: I have 2.4.xx, kernel ESFQ is for 2.6 kernel only ?
I need to limit max bandwidth for all users and fair share, do not need to have guaranteed-minimum
Quoted 7 lines
mathematic is simple: N*user <= 256kbps
soo if I have one user on vpn, hi gets 256kbps
if I have 2 users on vpn downloading, both is getting max 128kbps and soo on...(this is too simple to be ...)
I am not familiar with ESFQ. In my test, SFQ doesn't provide good fairness. ESFQ should have some improvement, I think.
Any good implemented fair queue can achieve your goal.
Signature · 6 lines
lark _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 5 lines · mail.cat-net.co.yu
please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection,
how to build root tc rule, when I have more then one interface?... please any one width experiance
regards
You may be able to do it on ethx by marking or classifying in forward/postrouting and hoping the marks survive encapsulation. I've never tried so don't know.
If that fails there is also a chance you can do it with IMQ or the dummy device (You will need to build a 2.6 and use a different dummy.c I don't think the new one is in kernel yet).
Andy.
_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Quoted 1 line · hiphin
Q2: I have 2.4.xx, kernel ESFQ is for 2.6 kernel only ?
No, I've been using it in 2.4. for almost a year:
http://www.ssi.bg/~alex/esfq/
And you get unimportant minus points from me for not using google.
Bye,
Peter Surda (Shurdeek) <[email protected]>, ICQ 10236103, +436505122023
Signature · 5 lines
It's not a bug, it's tradition! _______________________________________________ LARTC mailing list [email protected] http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc