Tulip Drivers Problem in 2.4.xx Kernel
Hi ok I was told that you may be able to help me with this issue. I have a DEC DC 20141 NIC installed in this machine which uses the tulip drivers. I am using the 2.2.xx kernels right now and there are two different set of tulip drivers in this kernel. This driver in the 2.2.xx kernel works fine. I am compiling the 2.2.19 Kernel
But when I compile the 2.4.xx Kernel it stops working the kernel that I compling is 2.4.13 I noticed that in the 2.4.13 Kernel there is only 1 driver for the tulip drivers in this kernel.
There are 2 NICs in this machine a 3COM 3C900B-TPO NIC and ad DEC DC20141 NIC.
When I reboot the machine the drivers load fine, here is what I see in my log.
Nov 5 17:06:15 CS623805-A kernel: tulip0: 21041 Media table, default media 0800 (Autosense). Nov 5 17:06:15 CS623805-A kernel: tulip0: 21041 media #0, 10baseT. Nov 5 17:06:15 CS623805-A kernel: tulip0: 21041 media #4, 10baseT-FDX. Nov 5 17:06:15 CS623805-A kernel: eth0: Digital DC21041 Tulip rev 17 at 0x6100, 21041 mode, 00:00:C0:90:F0:E3, IRQ 3. Nov 5 17:06:15 CS623805-A kernel: cdrom: open failed. Nov 5 17:06:24 CS623805-A sendmail[112]: starting daemon (8.11.4): SMTP+queuein g@00:15:00 Nov 5 17:06:26 CS623805-A kernel: 00:0b.0: 3Com PCI 3c900 Cyclone 10Mbps
TPO at
0x6200. Vers LK1.1.16
All the drivers load up fine but I get no communication between the NIC and my cable modem I get no PC light on the front of the cable modem there is no connection between the DEC DC 21041 NIC and the cable modem. There are no errors in /var/log/messages when the machine is booting up. But there is no communication to this NIC. I noticed as well that in the 2.2.xx Kernel in the tulip.c you use Donald Becker's Tulip Drivers.
/* tulip.c: A DEC 21040-family ethernet driver for Linux. */ /*
Written/copyright 1994-1999 by Donald Becker.
This software may be used and distributed according to the terms of the GNU Public License, incorporated herein by reference.
This driver is for the Digital "Tulip" Ethernet adapter interface. It should work with most DEC 21*4*-based chips/ethercards, as well
as
with work-alike chips from Lite-On (PNIC) and Macronix (MXIC) and
ASIX.
The author may be reached as [email protected], or C/O Center of Excellence in Space Data and Information Sciences
Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
Support and updates available at
http://cesdis.gsfc.nasa.gov/linux/drivers/tulip.html
This driver also contains updates by Wolfgang Walter and others.
For this specific driver variant please use linux-kernel for bug reports.
Updated 12/17/2000 by Jim McQuillan <[email protected]> to include support for the Linksys LNE100TX card based on the Admtek 985 Centaur-P chipset.
*/
Here are the drivers from the 2.4.xx Kernel as well.
2001-07-17 Erik A. Hendriks <[email protected]>
* 21142.c: Merge fix from tulip.c 0.92w which prevents the overwriting of csr6 bits we want to preserve.
2001-07-10 Jeff Golds <[email protected]>
* tulip_core.c: Fix two comments
2001-07-06 Stephen Degler <[email protected]>
* media.c:
The media selection process at the end of NWAY is busted because for the case of MII/SYM it needs to be:
csr13 <- 0
csr14 <- 0
csr6 <- the value calculated is okay.
As per the Maintaners file included with the 2.4.13 source I am CCing the people who
are mainting these tulip drivers in this kernel as well.
TULIP NETWORK DRIVER
P: Jeff Garzik M: [email protected] L: [email protected] W: http://sourceforge.net/projects/tulip/ S: Maintained
Also as per the 2.2.19 Kernel in the REPORTING-BUGS file
Send the output the maintainer of the kernel area that seems to
be involved with the problem. Don't worry too much about getting the wrong person. If you are unsure send it to the person responsible for the code relevant to what you were doing. If it occurs repeatably try and describe how to recreate it. That is worth even more than the oops itself. The list of maintainers is in the MAINTAINERS file in this directory.
If you are totally stumped as to whom to send the report, send it to
[email protected]. (For more information on the linux-kernel mailing list see http://www.tux.org/lkml/).
What I would like to see happen is that you go back to the tulip.c drivers from the 2.2.xx Kernel into the 2.4.xx Kernel. because the drivers for the tulip.c in the 2.4.xx kernel are broken for the DEC DC21041 NIC.
This issue needs to be immediately fixed in the 2.4.xx kernel the drivers are not currently functioning correctly.
The machine that this is running is a Pentium 200 MMX 64 MB or Ram. 4 Gig hard drive. This machine is optomized as a router/gateway only. As I said everything runs fine with the 2.2.xx kernel but when I go to compile the 2.4.xx kernel it does not communicate with this NIC correctly all the drivers load properly but I can't connect out using the 2.4.xx drivers.
Here is the information from /proc/cpuinfo
processor : 0vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 4
cpu MHz : 200.457fdiv_bug : nohlt_bug : nosep_bug : nof00f_bug : yescoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx
bogomips : 399.76
Here is the information from /proc/version as well
Linux version 2.2.19 (root@CS623805-A) (gcc version 2.95.3 20010315 (release)) #
5 Mon Nov 5 17:07:53 EST 2001
That is the current version I am running right now since the 2.4.xx kernel is not working correctly with the DEC DC21041 NIC I have as one of the cards in this machine.
Please look into this issue for me please with the 2.4.xx Kernel series. If you need to reach me please email me back at [email protected]
Thanks,
Jamie
Currently there is a bug in 2.4.x-current tulip drivers that prevents 21041 from initializing correctly. Until then you can use the 'de4x5' driver or download the latest stable version on the tulip web page:
http://sourceforge.net/projects/tulip/
Signature · 3 lines
Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno
Ok Jeff thanks I will definately give that a try I have never tried the dec4x5 drivers I will see if it works
for my NIC.
Thanks,
Jamie
----- Original Message -----
From: "Jeff Garzik" <[email protected]>
To: "Jamie" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; "Anders Hedborg" <[email protected]>
Sent: Monday, November 05, 2001 7:07 PM
Subject: Re: Tulip Drivers Problem in 2.4.xx Kernel
Currently there is a bug in 2.4.x-current tulip drivers that prevents 21041 from initializing correctly. Until then you can use the 'de4x5' driver or download the latest stable version on the tulip web page:
http://sourceforge.net/projects/tulip/
--
Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno
All,
Donald Becker had given be some pointers.
I had problems on Windows 95 as well.
Here is what I came up with ... in terms of the system.
The old HP Pavalion uses a Intel motherboard and the Intel bios (with HP logo etc..)
The PCI is only 2.0? compliant and the card is meant for 2.1 systems..
The on board sounnd and graphics was a pain. Not a like I could just pull out the graphics or sound PCI card to free up resources.
Windows wanted to use PCI Steering -- I couldn't get it turned off (IRQ sharing with the onboard video card..)
Long story short....
I was able to through a Netgear ISA card in assign the IRQ iomem address via the DOS config tool (writes EEPROM?), and cfdisk, and install
RH 7.0
Does the PCI 2.0 - PCI 2.1 make a difference.
Do I have a chance here to get PCI card up and running?
Thanks,
Eric
Quoted 40 lines · Jamie
Ok Jeff thanks I will definately give that a try I have never tried the dec4x5 drivers I will see if it works
for my NIC.Thanks,
Jamie
----- Original Message -----
From: "Jeff Garzik" <[email protected]>
To: "Jamie" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; "Anders Hedborg" <[email protected]>
Sent: Monday, November 05, 2001 7:07 PM
Subject: Re: Tulip Drivers Problem in 2.4.xx KernelCurrently there is a bug in 2.4.x-current tulip drivers that prevents 21041 from initializing correctly. Until then you can use the 'de4x5' driver or download the latest stable version on the tulip web page:
http://sourceforge.net/projects/tulip/
--Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/_______________________________________________
Tulip-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tulip-users
To get it to work on Slackware 8 I had to go to the website he listed bellow and download the drivers and use the stable drivers from the website he listed bellow it was the only way to get it to work.
Jamie
----- Original Message -----
From: "EricMarts" <[email protected]>
To: "Jamie" <[email protected]>
Cc: "Jeff Garzik" <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; "Anders Hedborg" <[email protected]>
Sent: Tuesday, November 06, 2001 11:50 AM
Subject: Re: Tulip Drivers Problem in 2.4.xx Kernel
All,
Donald Becker had given be some pointers.
I had problems on Windows 95 as well.
Here is what I came up with ... in terms of the system.
The old HP Pavalion uses a Intel motherboard and the Intel bios (with HP logo etc..)
The PCI is only 2.0? compliant and the card is meant for 2.1 systems..
The on board sounnd and graphics was a pain. Not a like I could just pull out the graphics or sound PCI card to free up resources.
Windows wanted to use PCI Steering -- I couldn't get it turned off (IRQ sharing with the onboard video card..)
Long story short....
I was able to through a Netgear ISA card in assign the IRQ iomem address via the DOS config tool (writes EEPROM?), and cfdisk, and install
RH 7.0
Does the PCI 2.0 - PCI 2.1 make a difference.
Do I have a chance here to get PCI card up and running?
Thanks,
Eric
Quoted 6 lines · Jamie
Ok Jeff thanks I will definately give that a try I have never tried the dec4x5 drivers I will see if it works
for my NIC.Thanks,
Quoted 8 lines
Jamie
----- Original Message -----
From: "Jeff Garzik" <[email protected]>
To: "Jamie" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>;
"Anders
Quoted 26 lines
Hedborg" <[email protected]>
Sent: Monday, November 05, 2001 7:07 PM
Subject: Re: Tulip Drivers Problem in 2.4.xx KernelCurrently there is a bug in 2.4.x-current tulip drivers that prevents 21041 from initializing correctly. Until then you can use the 'de4x5' driver or download the latest stable version on the tulip web page:
http://sourceforge.net/projects/tulip/
--Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/_______________________________________________
Tulip-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tulip-users
Yeah I have been through that.
Get the tip of the version, compile, modprobe (insmod) etc..
no luck..
I've tried with the 2.4.x series as well as the 2.2.x series kernels.
I know that they are really seperate teams and code bases...
the one @ sourceforge was the closest.., but still spewed messages...
Same issue? Are you able to get iomem reserved, a good irq?
Eric
Quoted 101 lines · Jamie
To get it to work on Slackware 8 I had to go to the website he listed bellow and download the drivers and use the stable drivers from the website he listed bellow it was the only way to get it to work.
Jamie
----- Original Message -----
From: "EricMarts" <[email protected]>
To: "Jamie" <[email protected]>
Cc: "Jeff Garzik" <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; "Anders Hedborg" <[email protected]>
Sent: Tuesday, November 06, 2001 11:50 AM
Subject: Re: Tulip Drivers Problem in 2.4.xx KernelAll,
Donald Becker had given be some pointers.
I had problems on Windows 95 as well.
Here is what I came up with ... in terms of the system.
The old HP Pavalion uses a Intel motherboard and the Intel bios (with HP logo etc..)
The PCI is only 2.0? compliant and the card is meant for 2.1 systems..
The on board sounnd and graphics was a pain. Not a like I could just pull out the graphics or sound PCI card to free up resources.
Windows wanted to use PCI Steering -- I couldn't get it turned off (IRQ sharing with the onboard video card..)
Long story short....
I was able to through a Netgear ISA card in assign the IRQ iomem address via the DOS config tool (writes EEPROM?), and cfdisk, and install
RH 7.0
Does the PCI 2.0 - PCI 2.1 make a difference.
Do I have a chance here to get PCI card up and running?
Thanks,
Eric
Quoted 6 lines · Jamie
Ok Jeff thanks I will definately give that a try I have never tried the dec4x5 drivers I will see if it works
for my NIC.Thanks,
Quoted 8 lines
Jamie
----- Original Message -----
From: "Jeff Garzik" <[email protected]>
To: "Jamie" <[email protected]>
Cc: <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>; <[email protected]>;"Anders
Quoted 26 lines
Hedborg" <[email protected]>
Sent: Monday, November 05, 2001 7:07 PM
Subject: Re: Tulip Drivers Problem in 2.4.xx KernelCurrently there is a bug in 2.4.x-current tulip drivers that prevents 21041 from initializing correctly. Until then you can use the 'de4x5' driver or download the latest stable version on the tulip web page:
http://sourceforge.net/projects/tulip/
--Jeff Garzik | Only so many songs can be sung Building 1024 | with two lips, two lungs, and one tongue. MandrakeSoft | - nomeansno-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/_______________________________________________
Tulip-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tulip-users