Skip to contentSkip to conversation

What Athlon chipset is most stable in Linux?

DISCUSSION Martin Eriksson 18 participants 36 messages Nov 13, 2001 – Nov 20, 2001

lore
Share & tools
lore
#0 lore raw

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?

I assume it's the AMD DDR chipset, but I want to be pretty sure.

Btw, do compilators currently optimize for the third floating-point unit in Athlon XP processors?

_____________________________________________________

|  Martin Eriksson <[email protected]>
|  MSc CSE student, department of Computing Science
|  Umeå University, Sweden
#1 lore raw
Quoted 4 lines · Martin Eriksson

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?
I assume it's the AMD DDR chipset, but I want to be pretty sure.

I have no problems with the ALi Magik 1 chipset. I'm running a 1 GHz Duron with 512 MB DDR-RAM at the moment.

Signature · 3 lines
Ciao, Pascal

-<[ [email protected], netmail 2:241/215.72, home http://cobol.cjb.net/) ]>-
#2 lore raw
In reply to Martin Eriksson
Quoted 5 lines · Martin Eriksson

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?

I assume it's the AMD DDR chipset, but I want to be pretty sure.

I have no problems with the 1400MHz Athlon on AMD 760, including DRI using the AGP bridge.

-jwb

#3 lore raw
In reply to Martin Eriksson
Quoted 8 lines · Martin Eriksson

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?

I assume it's the AMD DDR chipset, but I want to be pretty sure.

Btw, do compilators currently optimize for the third floating-point unit in Athlon XP processors?

Well, here's my little anecdote:

We bought 33 1.4 GHz AMD Athlons (non-XP) with the slightly deprecated VIA KT266 Chipset (Spacewalker AK31 motherboards.. not exactly the Lexus of the M/B world but oh well)..

Anyway, after trying various (2.4) kernel versions, both with and without the new VM, both with and without Alan's magik, I can say that the only way we got 99% uptime on these systems (as opposed to like the 70% uptime I was getting from random kernel oopses) was to turn any Athlon and/or Pentium optimizations off when compiling the kernel. With any form of compilation for a CPU >386, the kernel would crash on at least 2 of the boxes per day. The oops stack trace seemed to always indicate a crash when in the paging code.. so it was a virtual memory problem? (I can only speculate and I haven't bothered to investigate much further). I am not sure if I encountered some unknown bug in my motherboard that needs some yet undiscovered workaround or what. All I can say is stay away from the KT266 chipset (however the newer KT266A seems to work fine based on what I have seen and am told) if you can. But then again I may be crazy and/or there may be workarounds or bios fixes for my problem, if it was really kernel-related. (I suspect it was, but haven't bothered to figure out exactly how to reproduce it so as to submit a patch.. the systems would crash randomly and invesitigating it futher seemed onerous).

-Calin

Quoted 13 lines

_____________________________________________________

|  Martin Eriksson <[email protected]>
|  MSc CSE student, department of Computing Science
|  Ume� University, Sweden

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw

We've tried a number of boards for our application servers and the only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Other AMD 761 boards may work, but I've made too many late night trips to the colo to stray from what I know works. DDR support seems to be the breaking point on most boards.

-- Brian

Quoted 15 lines · Calin A. Culianu
Quoted 8 lines · Martin Eriksson

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?

I assume it's the AMD DDR chipset, but I want to be pretty sure.

Btw, do compilators currently optimize for the third floating-point unit in Athlon XP processors?

Well, here's my little anecdote:

We bought 33 1.4 GHz AMD Athlons (non-XP) with the slightly deprecated VIA KT266 Chipset (Spacewalker AK31 motherboards.. not exactly the Lexus of the M/B world but oh well)..

#5 lore raw

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 16:37:28 -0500

We've tried a number of boards for our application servers and the only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.

#6 lore raw
Quoted 3 lines · David S. Miller

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.

I thought there was a northbridge configuration workaroud for this errata. (And no smarty pants replies like "yeah, dont use AGP")

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
#7 lore raw

From: Dan Hollis <[email protected]>
Date: Tue, 13 Nov 2001 19:05:11 -0800 (PST)

Quoted 3 lines · David S. Miller

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.

I thought there was a northbridge configuration workaroud for this errata. (And no smarty pants replies like "yeah, dont use AGP")

No, the AMD761 AGP problems have no known fixes (outside of AMD). AMD's windows drivers have the workarounds.

#8 lore raw
In reply to David S. Miller
Quoted 3 lines · David S. Miller

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.

BTW this bug apparently doesnt affect AMD760MP as I am able to use geforce2 with quake and unreal tournament for hours straight without any problems.

Havent tried radeon on 760MP. But geforce2 works fine.

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
#9 lore raw

From: Dan Hollis <[email protected]>
Date: Tue, 13 Nov 2001 19:11:56 -0800 (PST)

BTW this bug apparently doesnt affect AMD760MP as I am able to use geforce2 with quake and unreal tournament for hours straight without any problems.

What is your quake3 com_maxfps set to? By default it is 85, and that can hide the bug. Set it to 130 or something like that.

Just bring down the quake3 console (with ') and type

/com_maxfps 130

Try that for a while.

I'm rather sure the AMD761 problems are motherboard vendor independant, because I have 2 systems so far, using totally different AMD761 based motherboards, which both hang pretty reliably with AGP.

Franks a lot,
David S. Miller
[email protected]

#10 lore raw
Quoted 10 lines · David S. Miller

From: Dan Hollis <[email protected]>
Date: Tue, 13 Nov 2001 19:11:56 -0800 (PST)

BTW this bug apparently doesnt affect AMD760MP as I am able to use geforce2 with quake and unreal tournament for hours straight without any problems.

I'm rather sure the AMD761 problems are motherboard vendor independant, because I have 2 systems so far, using totally different AMD761 based motherboards, which both hang pretty reliably with AGP.

As far as I know, the 760MP chipset uses a 762 North Bridge, not a 761. That might explain why the 760MP is stable and the 760 is not.

Ion

Signature · 2 lines
  It is better to keep your mouth shut and be thought a fool,
            than to open it and remove all doubt.
#11 lore raw
In reply to David S. Miller
Quoted 8 lines · David S. Miller

What is your quake3 com_maxfps set to? By default it is 85, and that can hide the bug. Set it to 130 or something like that.

<snip!>

I'm rather sure the AMD761 problems are motherboard vendor independant, because I have 2 systems so far, using totally different AMD761 based motherboards, which both hang pretty reliably with AGP.

Last night I decided to test this out on my Asus A7M (AMD761 and VIA 686b), which has a 1.4 Ghz Athlon, Creative SBLive!, 3Com 3c905B, and an Asus V8200 (GeForce3 64Mb DDR). The case has very good airflow, at about 120 Cubic Feet per Minute, and most of this passes past the CPU. PSU is a 300W Enhance (brand name) power supply - use a lot of this brand, and they are good quality. Linux kernel is 2.4.14 vanilla, with the Nvidia 1.0-1541 binary driver (using kernel AGPgart, and Nvidia module options for speed), XFree86 4.1.0 that is currently in Debian sid. Was running at 1024x768 at 24 bit, defaults for Q3A texture settings, sound, etc, with /com_maxfps set to 255. I played the single player setup against the bots (in the medium hardness setting - I didn't lose a round, which kept the 3D going as continuous as possible) from the start to the finish (all 6 tiers and the final Z tier) without a lockup. Note: I do not run the Riva FrameBuffer module, nor do I enable ANY of the APM options (eg: Make CPU Idle calls, Enable console blanking, etc) in the kernel, just the generic APM support itself - mainly so the machine shuts off automatically after shutdown).

AGP and bad Power Supplies are always a problem, especially when you try and exploit anything greater than 1x AGP, and the power drain really rises. Heat is always an issue, but with good cooling, most problems vanish.

Sure that beanie of yours isn't cutting off the circulation, or that you've been drinking too much V again Dave? *joke*

BTW: As a member of a group called the LGL (or Linux Gamers League) here in Australia, I help out a lot of people who want to get their systems running games, particularly 3D stuff like Q3A, UT, and Tribes2. I've been able to track down most of the crash issues with AMD 76x chipsets to either 1) bad quality components, 2) heat or 3) power supplies. Admittedly AMD 760 (vanilla, not sure about MP) chipsets don't like doing more than 1x AGP, but since they are a bit old in the tooth now, this isn't so much of a problem for us gamers. If there was a huge issue with this, I'm sure you'd hear a hell of a lot of the guys and girls (yes, girls play games under Linux too!) in the LGL complaining about it. *grin*

Take care.

AMC Enterprises P/L    - Stuart Young
First Floor            - Network and Systems Admin
3 Chesterville Rd      - [email protected]
Cheltenham Vic 3192    - Ph:  (03) 9584-2700

http://www.amc.com.au/ - Fax: (03) 9584-2755

#12 lore raw

You won't see the problem with the GeForce3 because it has stricter AGP timings.

The problem is going to show up with cards that are a little bit out of the AGP spec, this includes the Radeon and the GeForce2.

Franks a lot,
David S. Miller
[email protected]

#13 lore raw
In reply to David S. Miller
Quoted 13 lines · David S. Miller

From: Dan Hollis <[email protected]>
Date: Tue, 13 Nov 2001 19:11:56 -0800 (PST)

BTW this bug apparently doesnt affect AMD760MP as I am able to use geforce2 with quake and unreal tournament for hours straight without any problems.

What is your quake3 com_maxfps set to? By default it is 85, and that can hide the bug. Set it to 130 or something like that.

Just bring down the quake3 console (with ') and type

Quoted 8 lines

/com_maxfps 130

Try that for a while.

I'm rather sure the AMD761 problems are motherboard vendor independant, because I have 2 systems so far, using totally different AMD761 based motherboards, which both hang pretty reliably with AGP.

My dual Tyan runs Q3A, UT, and Tribes 2 at over 100fps at times with no problems UNLESS I enable DMA for the IDE drive. Q3a will go above 130fps (map and game dependent), UT will go even higher, and Tribes 2 will hit right around 140fps if I'm in a room (any outdoor areas slow WAY down).

I am running 2.4.9ac10 with a few minor tweaks, agpgart slightly tweaked compiled in, and a tweaked Detonator 3 nVidia driver. I plan to upgrade all these soon and see what happens.

My A7V133 however is crap when it comes to playing games. It's been demoted to straight server duty. :)

PGA

Signature · 5 lines
Paul G. Allen
UNIX Admin II/Programmer
Akamai Technologies, Inc.
www.akamai.com
Work: (858)909-3630
#14 lore raw
Quoted 2 lines · Paul G. Allen

I am running 2.4.9ac10 with a few minor tweaks, agpgart slightly tweaked compiled in, and a tweaked Detonator 3 nVidia driver

                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

???

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
#15 lore raw
Quoted 5 lines · Dan Hollis
Quoted 2 lines · Paul G. Allen

I am running 2.4.9ac10 with a few minor tweaks, agpgart slightly tweaked compiled in, and a tweaked Detonator 3 nVidia driver

                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

???

Damn binary thing.

It's the same core code as the Windows Detonator 3 driver. Hence the mention.

The next one will be based on the Detonator 4 core code, so things like OpenGL 1.3 (which is supposedly available with the Detonator 4 drivers under Windows) will be available.

Paul, you may want to see my post earlier re 2.4.14 vanilla and my experiences so far, which have all been good.

AMC Enterprises P/L    - Stuart Young
First Floor            - Network and Systems Admin
3 Chesterville Rd      - [email protected]
Cheltenham Vic 3192    - Ph:  (03) 9584-2700

http://www.amc.com.au/ - Fax: (03) 9584-2755

#16 lore raw
In reply to Paul G. Allen
Quoted 8 lines · Stuart Young
Quoted 5 lines · Dan Hollis
Quoted 2 lines · Paul G. Allen

I am running 2.4.9ac10 with a few minor tweaks, agpgart slightly tweaked compiled in, and a tweaked Detonator 3 nVidia driver

                     ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

???

I made a couple small changes so that it would recognize the MP chipset and not drop to a generic operational mode. The generic mode did not work properly and would cause occasional system hangs. Fast writes still won't work, but I think a BIOS upgrade might fix that.

Quoted 11 lines

Damn binary thing.

It's the same core code as the Windows Detonator 3 driver. Hence the mention.

The next one will be based on the Detonator 4 core code, so things like OpenGL 1.3 (which is supposedly available with the Detonator 4 drivers under Windows) will be available.

Paul, you may want to see my post earlier re 2.4.14 vanilla and my experiences so far, which have all been good.

I just saw it. I am a registered nVidia developer, but have been too busy with other things (mainly working on the V12 game engine) to look into updating my actual system software and ping on nVidia about their Linux driver. I asked them once a while back, and they said "A new driver will be released soon, so wait for that."

I'm getting ready to do it though, since I need to wait for another developer to fix some code (in the game engine) before I can continue.

PGA

Signature · 5 lines
Paul G. Allen
UNIX Admin II/Programmer
Akamai Technologies, Inc.
www.akamai.com
Work: (858)909-3630
#17 lore raw
In reply to David S. Miller
Quoted 9 lines · Chris Wedgwood

On Wed, Nov 14, 2001 at 05:03:21PM -0800, Paul G. Allen wrote:

I am running 2.4.9ac10 with a few minor tweaks, agpgart slightly tweaked compiled in, and a tweaked Detonator 3 nVidia driver. I plan to upgrade all these soon and see what happens.

Is this different from 1541? If so, where might I find this

I just D/L, modified and compiled 1541. A cat of /proc/nv/card0 shows:

[root@keroon /root]# cat /proc/nv/card0
----- Driver Info -----
NVRM Version: 1.0-1541
------ Card Info ------

Model:        GeForce3
IRQ:          17
Video BIOS:   03.20.00.10
------ AGP Info -------
AGP status:   Enabled
AGP Driver:   NVIDIA
Bridge:       AMD Irongate MP
SBA:          Supported [enabled]
FW:           Supported [disabled]
Rates:        4x 2x 1x  [4x]
Registers:    0x0f000217:0x00000304

[root@keroon /root]#

So, AGP 4x and Side Band Addressing is enabled, but for some reason Fast Writes are not. I am still using the 2.06 Tyan BIOS (as shipped) and need to upgrade to the latest (I've had trouble getting the BIOS file from the Tyan web site). agpgart is not compiled into this kernel, so as you can see it's using the NVIDIA driver instead. I e-mailed developer support at nVidia to ask why FW is disabled even though it's supported (it could very well be the BIOS).

I also installed thier GLX libraries.

PGA

Signature · 4 lines
Paul G. Allen
UNIX Admin II/Network Security
Akamai Technologies, Inc.
www.akamai.com
#18 lore raw
Quoted 30 lines · Paul G. Allen
Quoted 9 lines · Chris Wedgwood

On Wed, Nov 14, 2001 at 05:03:21PM -0800, Paul G. Allen wrote:

I am running 2.4.9ac10 with a few minor tweaks, agpgart slightly tweaked compiled in, and a tweaked Detonator 3 nVidia driver. I plan to upgrade all these soon and see what happens.

Is this different from 1541? If so, where might I find this

I just D/L, modified and compiled 1541. A cat of /proc/nv/card0 shows:

[root@keroon /root]# cat /proc/nv/card0
----- Driver Info -----
NVRM Version: 1.0-1541
------ Card Info ------

Model:        GeForce3
IRQ:          17
Video BIOS:   03.20.00.10
------ AGP Info -------
AGP status:   Enabled
AGP Driver:   NVIDIA
Bridge:       AMD Irongate MP
SBA:          Supported [enabled]
FW:           Supported [disabled]
Rates:        4x 2x 1x  [4x]
Registers:    0x0f000217:0x00000304

[root@keroon /root]#

Quoted 7 lines

So, AGP 4x and Side Band Addressing is enabled, but for some reason Fast Writes are not. I am still using the 2.06 Tyan BIOS (as shipped) and need to upgrade to the latest (I've had trouble getting the BIOS file from the Tyan web site). agpgart is not compiled into this kernel, so as you can see it's using the NVIDIA driver instead. I e-mailed developer support at nVidia to ask why FW is disabled even though it's supported (it could very well be the BIOS).

May-be, FW works quite well here, but they just want to enable it in some future driver version and then claim 50% speed improvement. :-) :o)

To be serious, FW needs special handling in AGP, notably flow-control by the target using WBF for example. As a result, it could well be broken for your board forever due to some errata in signalling.

Quoted 1 line

I also installed thier GLX libraries.

You seem to like bloat. :)

Gérard.

#19 lore raw
In reply to Brian

I've been pushing my AMD Abit KG7 board to the limits without crashing, using a Thunderbird 1.4. Don't forget that cooling is also an important issue with these processors/motherboards!!

(Mobo is using an AMD 761 AGP Bridge and the rest is from Via ... (don't recall, not behind pc)

DK

Quoted 26 lines · Brian

We've tried a number of boards for our application servers and the only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Other AMD 761 boards may work, but I've made too many late night trips to the colo to stray from what I know works. DDR support seems to be the breaking point on most boards.

-- Brian

Quoted 15 lines · Calin A. Culianu
Quoted 8 lines · Martin Eriksson

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?

I assume it's the AMD DDR chipset, but I want to be pretty sure.

Btw, do compilators currently optimize for the third floating-point unit in Athlon XP processors?

Well, here's my little anecdote:

We bought 33 1.4 GHz AMD Athlons (non-XP) with the slightly deprecated VIA KT266 Chipset (Spacewalker AK31 motherboards.. not exactly the Lexus of the M/B world but oh well)..

#20 lore raw
In reply to Calin A. Culianu
Quoted 9 lines · Brian

We've tried a number of boards for our application servers and the only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Other AMD 761 boards may work, but I've made too many late night trips to the colo to stray from what I know works. DDR support seems to be the breaking point on most boards.

Another thing to remember about Athlons is they need power and cooling. I've seen many a system with either a cheap power supply or a poorly ventilated case, and often both. Athlons WILL push the hardware harder, not to mention the power they suck down themselves, and need a power supply that can handle the load as well as the fast switching transitions. They also require more cooling, and not just on the CPU, but also on the chipset and throughout the case.

My dual 1.4GHz (K7 Thunder) has 12 fans in it. My single 1.4GHz has 8. They both have 400W+ power supplies.

PGA

Signature · 5 lines
Paul G. Allen
UNIX Admin II/Programmer
Akamai Technologies, Inc.
www.akamai.com
Work: (858)909-3630
#21 lore raw
Quoted 6 lines · Paul G. Allen
Quoted 5 lines · Brian

We've tried a number of boards for our application servers and the only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Quoted 8 lines
Quoted 4 lines

Other AMD 761 boards may work, but I've made too many late night trips to the colo to stray from what I know works. DDR support seems to be the breaking point on most boards.

Another thing to remember about Athlons is they need power and cooling. I've seen many a system with either a cheap power supply or a poorly ventilated case, and often both. Athlons WILL push the hardware harder, not to mention the power they suck down themselves, and need a power supply that can handle the load as well as the fast switching transitions. They also require more cooling, and not just on the CPU, but also on the chipset and throughout the case.

Very true. I think good numbers to shoot for are like around 40-50 degrees C for the CPU temp, probably a bit lower for the M/B temp (like around high 30's?).

Quoted 5 lines

My dual 1.4GHz (K7 Thunder) has 12 fans in it. My single 1.4GHz has 8. They both have 400W+ power supplies.

PGA

#22 lore raw
In reply to Calin A. Culianu

The original question was for a cluster (of, presumably, servers). If you're playing a quake client on an application server, you deserve what you get.

-- Brian

Quoted 15 lines · David S. Miller

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 16:37:28 -0500

We've tried a number of boards for our application servers and the
only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#23 lore raw

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 22:11:29 -0500

The original question was for a cluster (of, presumably, servers). If you're playing a quake client on an application server, you deserve what you get.

Yes, but the "is rock solid" statement sounded rather generic and I wanted to correct that :-)

Franks a lot,
David S. Miller
[email protected]

#24 lore raw
Quoted 9 lines · David S. Miller

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 22:11:29 -0500

The original question was for a cluster (of, presumably, servers). If you're playing a quake client on an application server, you deserve what you get.

Yes, but the "is rock solid" statement sounded rather generic and I wanted to correct that :-)

Talcum, or diamond?

Mike

#25 lore raw
In reply to Brian

I have three asus a7v266 with 40-60 day uptimes under load at this point. these have the older version of the via kt266 chipset.

joelja

Quoted 28 lines · Brian

The original question was for a cluster (of, presumably, servers). If you're playing a quake client on an application server, you deserve what you get.

-- Brian

Quoted 7 lines · David S. Miller

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 16:37:28 -0500

We've tried a number of boards for our application servers and the
only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Quoted 8 lines

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 8 lines
-------------------------------------------------------------------------- 
Joel Jaeggli				       [email protected]    
Academic User Services			     [email protected]
     PGP Key Fingerprint: 1DE9 8FCA 51FB 4195 B42A 9C32 A30D 121E
--------------------------------------------------------------------------
It is clear that the arm of criticism cannot replace the criticism of
arms.  Karl Marx -- Introduction to the critique of Hegel's Philosophy of
the right, 1843.
#26 lore raw
Quoted 2 lines · Joel Jaeggli

I have three asus a7v266 with 40-60 day uptimes under load at this point. these have the older version of the via kt266 chipset.

Ok, actually i was a little drastic there. I think maybe I should have said "shuttle AK31 motherboards with the kt266 seem problematic at leasts in my experience". Yeah many people seem to be using the kt266 just fine.

Are you running with Athlon or pentium optimizations turned on?

-Calin

Quoted 36 lines

joelja

Quoted 28 lines · Brian

The original question was for a cluster (of, presumably, servers). If you're playing a quake client on an application server, you deserve what you get.

-- Brian

Quoted 7 lines · David S. Miller

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 16:37:28 -0500

We've tried a number of boards for our application servers and the
only UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Quoted 8 lines

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#27 lore raw
In reply to Calin A. Culianu

We've acutally had next to no hangs on the Thunder K7 using a FireGL2 card --- if you don't mind spending $1000+ for high end 3D graphics :-) Stay away from nVidia for now; though I understand they're working on fixes for this chipset for their next driver release.

Quoted 15 lines · David S. Miller

From: Brian <[email protected]>
Date: Tue, 13 Nov 2001 16:37:28 -0500

We've tried a number of boards for our application servers and the only
UP AMD DDR board I trust right now is the Gigabyte GA-7DX. They are rock solid.

Try to use the AGP slot with a Radeon of GeForce card, do something as simple as playing some quake with com_maxfps > 85 and the machine will hang solidly.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 6 lines
Marvin Justice
Software Developer
BOXX Technologies, Inc.
www.boxxtech.com
512-235-6318 (V)
512-835-0434 (F)
#28 lore raw
Quoted 4 lines · Marvin Justice

We've acutally had next to no hangs on the Thunder K7 using a FireGL2 card --- if you don't mind spending $1000+ for high end 3D graphics :-) Stay away from nVidia for now; though I understand they're working on fixes for this chipset for their next driver release.

Saw in your sig, I know who Boxx Tech is, they build machines like I build for myself, but for less money. :P

Anyway, to keep this kinda kernel related. How well supported are the FireGL cards? That is DRM wise, and of course X to go with that.

-Chris

Signature · 3 lines
Two penguins were walking on an iceberg.  The first penguin said to the
second, "you look like you are wearing a tuxedo."  The second penguin
said, "I might be..."                         --David Lynch, Twin Peaks
#29 lore raw
Quoted 4 lines · Chris Meadors

Anyway, to keep this kinda kernel related. How well supported are the FireGL cards? That is DRM wise, and of course X to go with that.

-Chris

Drivers are distributed pretty much the same way as nVidia, ie., as a binary core along with the necessary wrappers to compile for new kernels, private libGL.so, etc. Aside from that, we've generally had pretty positive experiences.

These aren't quake cards; in fact the demo1 fps are surprisingly low. In serious OpenGL benchmarks, however,
(http://www.specbench.org/gpc/opc.static/opcview.htm ) they're currently the fastest cards available for Linux by a long shot.

I think FGL is what people at ILM, Dreamworks, Digital Domain etc. are using at the moment in the gradual shift toward Linux on the artist's desktop. Not cheap --- unless you've already forked over $16K for Maya ;-)

Signature · 6 lines
Marvin Justice
Software Developer
BOXX Technologies, Inc.
www.boxxtech.com
512-235-6318 (V)
512-835-0434 (F)
#30 lore raw
In reply to Martin Eriksson
Quoted 4 lines · Martin Eriksson

I'm hearing rumours about my University wanting to set up a cluster with AMD Athlon XP+DDR computers, so I wonder what chipset is most stable under Linux?
I assume it's the AMD DDR chipset, but I want to be pretty sure.

AMD761 or AMD760MP(|X) is what you want. They seem to have by far the least bugs of all the Athlon chipsets (and coming from AMD, you would certainly hope so).

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]
#32 lore raw
Quoted 7 lines

From: Dan Hollis <[email protected]>
Date: Tue, 13 Nov 2001 13:19:07 -0800 (PST)

AMD761 ... is what you want.

Unless you actually plan on actually using the AGP slot without crashes/hangs.

Only if your card hits the AMD errata, and that specifically claims the card is the problem. It mostly appears to afflict nvidia users so its not a problem ;)

#33 lore raw

From: Alan Cox <[email protected]>
Date: Wed, 14 Nov 2001 10:51:49 +0000 (GMT)

Only if your card hits the AMD errata, and that specifically claims the card is the problem. It mostly appears to afflict nvidia users so its not a problem ;)

And radeon users...

Franks a lot,
David S. Miller
[email protected]

#34 lore raw
In reply to Alan Cox
Quoted 11 lines · Alan Cox
Quoted 7 lines

From: Dan Hollis <[email protected]>
Date: Tue, 13 Nov 2001 13:19:07 -0800 (PST)

AMD761 ... is what you want.

Unless you actually plan on actually using the AGP slot without crashes/hangs.

Only if your card hits the AMD errata, and that specifically claims the card is the problem. It mostly appears to afflict nvidia users so its not a problem ;)

Is Matrox G200 on this list ( or where can I find this document ? ) I am not addicted to Q3 :) , but testing my DRI configuration
Q3 locks my system in 2-3 min after game start .

sytem Abit KT7E
AMD DURON 800
256 MB RAM noname
Matrox G200
HD Maxtor 20 GB UDMA100
--------------------------------------------------------
Marek Mentel [email protected] 2:484/3.8 INSTITUTE FOR CHEMICAL PROCESSING OF COAL , Zabrze , POLAND
NOTE: my opinions are strictly my own and not those of my employer

#35 lore raw

From: "Marek Mentel" <[email protected]>
Date: Thu, 15 Nov 2001 14:57:31 -0500 (EST)

Is Matrox G200 on this list ( or where can I find this document ? ) I am not addicted to Q3 :) , but testing my DRI configuration
Q3 locks my system in 2-3 min after game start .

Ask AMD, they won't tell us...

My rule has been, if AGP usage makes it hang under Linux it must be on their list. Does this answer your question? :-)