irq 9: nobody cared! on 2.6.0-test9
I compiled and installed 2.6.0-test9 today on my AMD 1.1Ghz system (VIA KT133A Chipset, Gigabyte 7ZXE motherboard).
Its just a light server. I am not doing anything in particular that I know of to trigger this, but it does happen a while after every boot. I even flashed to the latest BIOS for this board and it still happens. The system is still perfectly usable afterwards.
Let me know if you need any more information.
Nov 22 22:14:06 dmdtech kernel: irq 9: nobody cared! Nov 22 22:14:06 dmdtech kernel: Call Trace: Nov 22 22:14:06 dmdtech kernel: [<c010b70b>] __report_bad_irq+0x2b/0x90 Nov 22 22:14:06 dmdtech kernel: [<c01ac9dd>] acpi_irq+0xf/0x1a Nov 22 22:14:06 dmdtech kernel: [<c010b804>] note_interrupt+0x64/0xa0 Nov 22 22:14:06 dmdtech kernel: [<c010bac9>] do_IRQ+0x139/0x150 Nov 22 22:14:06 dmdtech kernel: [<c0109de8>] common_interrupt+0x18/0x20 Nov 22 22:14:06 dmdtech kernel: [<c0120984>] do_softirq+0x44/0xa0 Nov 22 22:14:06 dmdtech kernel: [<c010baa3>] do_IRQ+0x113/0x150 Nov 22 22:14:06 dmdtech kernel: [<c0109de8>] common_interrupt+0x18/0x20 Nov 22 22:14:06 dmdtech kernel: [<c01668b4>] d_alloc+0xc4/0x200 Nov 22 22:14:06 dmdtech kernel: [<c0166d83>] d_lookup+0x23/0x50 Nov 22 22:14:06 dmdtech kernel: [<c015cb62>] real_lookup+0xa2/0xf0 Nov 22 22:14:06 dmdtech kernel: [<c015cdf6>] do_lookup+0x86/0xa0 Nov 22 22:14:06 dmdtech kernel: [<c015cf34>] link_path_walk+0x124/0x920 Nov 22 22:14:06 dmdtech kernel: [<c0161d41>] do_select+0x181/0x280 Nov 22 22:14:06 dmdtech kernel: [<c01408c1>] unmap_page_range+0x41/0x70 Nov 22 22:14:06 dmdtech kernel: [<c015e027>] open_namei+0x87/0x3f0 Nov 22 22:14:06 dmdtech kernel: [<c0161a30>] __pollwait+0x0/0xb0 Nov 22 22:14:06 dmdtech kernel: [<c014e851>] filp_open+0x41/0x70 Nov 22 22:14:06 dmdtech kernel: [<c014ed13>] sys_open+0x53/0x90 Nov 22 22:14:06 dmdtech kernel: [<c010947b>] syscall_call+0x7/0xb Nov 22 22:14:06 dmdtech kernel: Nov 22 22:14:06 dmdtech kernel: handlers: Nov 22 22:14:06 dmdtech kernel: [<c01ac9ce>] (acpi_irq+0x0/0x1a) Nov 22 22:14:06 dmdtech kernel: Disabling IRQ #9
/proc/interrupts:
CPU0
0: 7765751 IO-APIC-edge timer 1: 287249 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 2 IO-APIC-edge rtc 9: 100000 IO-APIC-level acpi (Curious note: Every time its done this, the count stops at 100000) 14: 23788 IO-APIC-edge ide0 17: 107243 IO-APIC-level eth0 18: 142287 IO-APIC-level eth1 NMI: 0 LOC: 7765938 ERR: 0 MIS: 0
dmesg:
Linux version 2.6.0-test9 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #4 Sat Nov 22 08:26:58 CST 2003 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000fb210
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa970
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT 0x00000009 MSFT 0x00000097) @ 0x1fff00b0
ACPI: DSDT (v001 VIA VT8371 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1100.526 MHz processor.
Console: colour VGA+ 80x25
Memory: 515908k/524224k available (1452k kernel code, 7568k reserved, 632k data, 132k init, 0k highmem)
Calibrating delay loop... 2162.68 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23
not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1099.0857 MHz.
..... host bus clock speed is 199.0974 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
IOAPIC[0]: Set PCI routing entry (2-12 -> 0xa9 -> IRQ 28 Mode:1 Active:1) 00:00:07[C] -> 2-12 -> IRQ 28
IOAPIC[0]: Set PCI routing entry (2-11 -> 0xb1 -> IRQ 27 Mode:1 Active:1) 00:00:07[D] -> 2-11 -> IRQ 27
IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb9 -> IRQ 17 Mode:1 Active:1) 00:00:09[A] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc1 -> IRQ 18 Mode:1 Active:1) 00:00:09[B] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc9 -> IRQ 19 Mode:1 Active:1) 00:00:09[C] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd1 -> IRQ 16 Mode:1 Active:1) 00:00:09[D] -> 2-16 -> IRQ 16
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Machine check exception polling timer started.
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Enabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
hda: IBM-DJNA-370910, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 17803440 sectors (9115 MB) w/1966KiB Cache, CHS=17662/16/63
hda: hda1 hda2
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
NET: Registered protocol family 1
Real Time Clock Driver v1.12
EXT3 FS on hda2, internal journal
Adding 393552k swap on /dev/hda1. Priority:-1 extents:1ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 17
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc000. Vers LK1.1.19 eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.htmleepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
eth1: OEM i82557/i82558 10/100 Ethernet, 00:50:8B:63:09:39, IRQ 18.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 702536-009, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
Bridge firewalling registered
eth0: Setting promiscuous mode.
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
bridge0: port 2(eth1) entering learning state
bridge0: port 1(eth0) entering learning stateip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
bridge0: topology change detected, propgating
bridge0: port 2(eth1) entering forwarding state
bridge0: topology change detected, propgating
bridge0: port 1(eth0) entering forwarding state
Quoted 3 lines · Darren Dupre
9: 100000 IO-APIC-level acpi (Curious note: Every time its done
this, the count stops at 100000)
Not curious at all. That's the cut-off-point of the message: we only check to complain about an interrupt after it has triggered spuriously (ie nobody claimed to handle it) for 99900 times out of the last 100000 times the interrupt happened.
So what seems to happen is that you have a lot of interrupts on irq9, but each time they happen the ACPI interrupt handler says "it wasn't for me", and we end up clearing the count. The kernel just doesn't react until it has seen a _lot_ of these spurious interrupts.
At that point it says "enough already, this irq is broken", and shuts it down.
Linus
Quoted 306 lines · Darren Dupre
I compiled and installed 2.6.0-test9 today on my AMD 1.1Ghz system (VIA KT133A Chipset, Gigabyte 7ZXE motherboard).
Its just a light server. I am not doing anything in particular that I know of to trigger this, but it does happen a while after every boot. I even flashed to the latest BIOS for this board and it still happens. The system is still perfectly usable afterwards.
Let me know if you need any more information.
Nov 22 22:14:06 dmdtech kernel: irq 9: nobody cared! Nov 22 22:14:06 dmdtech kernel: Call Trace: Nov 22 22:14:06 dmdtech kernel: [<c010b70b>] __report_bad_irq+0x2b/0x90 Nov 22 22:14:06 dmdtech kernel: [<c01ac9dd>] acpi_irq+0xf/0x1a Nov 22 22:14:06 dmdtech kernel: [<c010b804>] note_interrupt+0x64/0xa0 Nov 22 22:14:06 dmdtech kernel: [<c010bac9>] do_IRQ+0x139/0x150 Nov 22 22:14:06 dmdtech kernel: [<c0109de8>] common_interrupt+0x18/0x20 Nov 22 22:14:06 dmdtech kernel: [<c0120984>] do_softirq+0x44/0xa0 Nov 22 22:14:06 dmdtech kernel: [<c010baa3>] do_IRQ+0x113/0x150 Nov 22 22:14:06 dmdtech kernel: [<c0109de8>] common_interrupt+0x18/0x20 Nov 22 22:14:06 dmdtech kernel: [<c01668b4>] d_alloc+0xc4/0x200 Nov 22 22:14:06 dmdtech kernel: [<c0166d83>] d_lookup+0x23/0x50 Nov 22 22:14:06 dmdtech kernel: [<c015cb62>] real_lookup+0xa2/0xf0 Nov 22 22:14:06 dmdtech kernel: [<c015cdf6>] do_lookup+0x86/0xa0 Nov 22 22:14:06 dmdtech kernel: [<c015cf34>] link_path_walk+0x124/0x920 Nov 22 22:14:06 dmdtech kernel: [<c0161d41>] do_select+0x181/0x280 Nov 22 22:14:06 dmdtech kernel: [<c01408c1>] unmap_page_range+0x41/0x70 Nov 22 22:14:06 dmdtech kernel: [<c015e027>] open_namei+0x87/0x3f0 Nov 22 22:14:06 dmdtech kernel: [<c0161a30>] __pollwait+0x0/0xb0 Nov 22 22:14:06 dmdtech kernel: [<c014e851>] filp_open+0x41/0x70 Nov 22 22:14:06 dmdtech kernel: [<c014ed13>] sys_open+0x53/0x90 Nov 22 22:14:06 dmdtech kernel: [<c010947b>] syscall_call+0x7/0xb Nov 22 22:14:06 dmdtech kernel: Nov 22 22:14:06 dmdtech kernel: handlers: Nov 22 22:14:06 dmdtech kernel: [<c01ac9ce>] (acpi_irq+0x0/0x1a) Nov 22 22:14:06 dmdtech kernel: Disabling IRQ #9
/proc/interrupts:CPU0
0: 7765751 IO-APIC-edge timer 1: 287249 IO-APIC-edge i8042 2: 0 XT-PIC cascade 8: 2 IO-APIC-edge rtc 9: 100000 IO-APIC-level acpi (Curious note: Every time its done this, the count stops at 100000) 14: 23788 IO-APIC-edge ide0 17: 107243 IO-APIC-level eth0 18: 142287 IO-APIC-level eth1 NMI: 0 LOC: 7765938 ERR: 0 MIS: 0dmesg:
Linux version 2.6.0-test9 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #4 Sat Nov 22 08:26:58 CST 2003 BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 -000000000009fc00(usable)
BIOS-e820:000000000009fc00-00000000000a0000(reserved)
BIOS-e820:00000000000ec000- 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 -000000001fff0000(usable)
BIOS-e820:000000001fff0000-000000001fff8000(ACPI data)
BIOS-e820:000000001fff8000- 0000000020000000 (ACPI NVS)
BIOS-e820:00000000fec00000-00000000fec01000(reserved)
BIOS-e820:00000000fee00000-00000000fee01000(reserved)
BIOS-e820:00000000ffff0000- 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at000fb210
hm, page000fb000reserved twice.
hm, page000fc000reserved twice.
hm, page000f5000reserved twice.
hm, page000f6000reserved twice.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @0x000fa970
ACPI: RSDT (v001 AMIINTVIA_K70x00000010MSFT0x00000097) @0x1fff0000
ACPI: FADT (v001 AMIINTVIA_K70x00000011MSFT0x00000097) @0x1fff0030
ACPI: MADT (v001 AMIINT0x00000009MSFT0x00000097) @0x1fff00b0
ACPI: DSDT (v001 VIA VT83710x00001000MSFT0x0100000b) @0x00000000
ACPI: Local APIC address0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assignedapic_id2
IOAPIC[0]:apic_id2, version 17, address0xfec00000, IRQ 0-23
ACPI:INT_SRC_OVR(bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
ACPI:INT_SRC_OVR(bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1100.526 MHz processor.
Console: colour VGA+ 80x25
Memory: 515908k/524224k available (1452k kernel code, 7568k reserved, 632k data, 132k init, 0k highmem)
Calibrating delay loop... 2162.68 BogoMIPSDentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
initIO_APICIRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23
not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0011.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1099.0857 MHz.
..... host bus clock speed is 199.0974 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at0xfdb31, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20031002
IOAPIC[0]: Set PCI routing entry (2-9 ->0x71-> IRQ 9 Mode:1 Active:1)
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
IOAPIC[0]: Set PCI routing entry (2-12 ->0xa9-> IRQ 28 Mode:1 Active:1) 00:00:07[C] -> 2-12 -> IRQ 28
IOAPIC[0]: Set PCI routing entry (2-11 ->0xb1-> IRQ 27 Mode:1 Active:1) 00:00:07[D] -> 2-11 -> IRQ 27
IOAPIC[0]: Set PCI routing entry (2-17 ->0xb9-> IRQ 17 Mode:1 Active:1) 00:00:09[A] -> 2-17 -> IRQ 17
IOAPIC[0]: Set PCI routing entry (2-18 ->0xc1-> IRQ 18 Mode:1 Active:1) 00:00:09[B] -> 2-18 -> IRQ 18
IOAPIC[0]: Set PCI routing entry (2-19 ->0xc9-> IRQ 19 Mode:1 Active:1) 00:00:09[C] -> 2-19 -> IRQ 19
IOAPIC[0]: Set PCI routing entry (2-16 ->0xd1-> IRQ 16 Mode:1 Active:1) 00:00:09[D] -> 2-16 -> IRQ 16
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-17 already programmed
Pin 2-18 already programmed
Pin 2-19 already programmed
Pin 2-16 already programmed
Pin 2-16 already programmed
Pin 2-17 already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Machine check exception polling timer started.
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Enabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O0x3f8(irq = 4) is a 16550A
ttyS1 at I/O0x2f8(irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: IDE controller at PCI slot 0000:00:07.1VP_IDE: chipset revision 6VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xxVP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:piohda: IBM-DJNA-370910, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 17803440 sectors (9115 MB) w/1966KiB Cache, CHS=17662/16/63
hda: hda1 hda2
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Translated Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
NET: Registered protocol family 1
Real Time Clock Driver v1.12
EXT3 FS on hda2, internal journal
Adding 393552k swap on/dev/hda1. Priority:-1 extents:1ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 17
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0d.0: 3Com PCI 3c905B Cyclone 100baseTx at0xc000. Vers LK1.1.19 eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.htmleepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
eth1: OEM i82557/i82558 10/100 Ethernet, 00:50:8B:63:09:39, IRQ 18.
Receiver lock-up bug exists -- enabling work-around.
Board assembly 702536-009, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
Bridge firewalling registered
eth0: Setting promiscuous mode.
device eth0 entered promiscuous mode
Quoted 9 lines
device eth1 entered promiscuous mode
bridge0: port 2(eth1) entering learning state
bridge0: port 1(eth0) entering learning stateip_conntrackversion 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
bridge0: topology change detected, propgating
bridge0: port 2(eth1) entering forwarding state
bridge0: topology change detected, propgating
bridge0: port 1(eth0) entering forwarding state
Darren,
http://bugme.osdl.org/show_bug.cgi?id=1352
Does this bug match your system at all?
thanks,
Joshua