Skip to contentSkip to conversation

DVD Problem

DISCUSSION Christian Hilgers 3 participants 6 messages Mar 4, 2001 – Mar 5, 2001

lore
Share & tools
lore
#0 lore raw

Hi,

I'm trying to use the 2.4.1 Kernel but I have some troubles with my ATAPI Matsushita UJDA510 DVD (Intel 82371AB/EP PCI Bus Master IDE Controler).
It works perfekt with CD-Rom but when I try to read a ISO 9660 DVD I got an error.

I can mount the DVD and I can list the complet content but I guess I can't access any File behind 650 MB.

e.g.

mount /cdrom

$ cat /cdrom/blah/blah/INDEX
cat: INDEX.german: Input/output error

The kernel log

Mar  3 18:45:06 laptop kernel: VFS: Disk change detected on device
ide1(22,0)
Mar  3 18:45:10 laptop kernel: ISO 9660 Extensions: RRIP_1991A
Mar  3 18:46:05 laptop kernel: attempt to access beyond end of device
Mar  3 18:46:05 laptop kernel: 16:00: rw=0, want=2855480, limit=1052700

It also works well with a 2.2.14-SuSE Kernel.

Any hints.

Thanks
Christian

#1 lore raw

On Sun, 4 Mar 2001, Christian Hilgers wrote:

So you need to compile the kernel with UDF support , which is the filesystem used in DVDs. As you said, iso9660 works, but only for the first 650 mb. And after it take a look at www.linuxvideo.org and www.videolan.org.

Quoted 28 lines

Hi,

I'm trying to use the 2.4.1 Kernel but I have some troubles with my ATAPI Matsushita UJDA510 DVD (Intel 82371AB/EP PCI Bus Master IDE Controler).
It works perfekt with CD-Rom but when I try to read a ISO 9660 DVD I got an error.

I can mount the DVD and I can list the complet content but I guess I can't access any File behind 650 MB.

e.g.

mount /cdrom

$ cat /cdrom/blah/blah/INDEX
cat: INDEX.german: Input/output error

The kernel log

Mar  3 18:45:06 laptop kernel: VFS: Disk change detected on device
ide1(22,0)
Mar  3 18:45:10 laptop kernel: ISO 9660 Extensions: RRIP_1991A
Mar  3 18:46:05 laptop kernel: attempt to access beyond end of device
Mar  3 18:46:05 laptop kernel: 16:00: rw=0, want=2855480, limit=1052700

It also works well with a 2.2.14-SuSE Kernel.

Any hints.

Quoted 9 lines

Thanks
Christian

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

David Gómez

"The question of whether computers can think is just like the question of
whether submarines can swim." -- Edsger W. Dijkstra

#2 lore raw

Von: <[email protected]>

Quoted 8 lines · Christian Hilgers

So you need to compile the kernel with UDF support , which is the filesystem used in DVDs. As you said, iso9660 works, but only for the first 650 mb. And after it take a look at www.linuxvideo.org and www.videolan.org.

UDF was the first I tried, but it didn't work.

Christian

Quoted 6 lines
Quoted 6 lines

Hi,

I'm trying to use the 2.4.1 Kernel but I have some troubles with my ATAPI Matsushita UJDA510 DVD (Intel 82371AB/EP PCI Bus Master IDE Controler).
It works perfekt with CD-Rom but when I try to read a ISO 9660 DVD I

got

Quoted 4 lines
Quoted 4 lines

an error.

I can mount the DVD and I can list the complet content but I guess I can't access any File behind 650 MB.

#3 lore raw
In reply to [email protected]

Von: Markus Pfeiffer <[email protected]>
An: <[email protected]>; Christian Hilgers <[email protected]>
Cc: Linux kernel <[email protected]>

Quoted 8 lines
Quoted 6 lines · Christian Hilgers

So you need to compile the kernel with UDF support , which is the filesystem used in DVDs. As you said, iso9660 works, but only for the first 650 mb. And after it take a look at www.linuxvideo.org and www.videolan.org.

Won´t work. UDF is a fs of its own. I think there´s something wrong

with ide

Quoted 1 line

(DVD or controller or BIOS ) which reports wrong device size ...

I tried Kernel 2.4.0, this one is also working fine. Than I used the same .config for the 2.4.1 Kernel.
And the DVD did't work!!
Maybe a bug in the CD-Rom driver?
I think I will try the 2.4.2 Kernel.

Christian

#4 lore raw
In reply to [email protected]
Quoted 5 lines · Christian Hilgers

I tried Kernel 2.4.0, this one is also working fine. Than I used the same .config for the 2.4.1 Kernel.
And the DVD did't work!!
Maybe a bug in the CD-Rom driver?
I think I will try the 2.4.2 Kernel.

The bug has been fixed in 2.4.2

Signature · 1 line
Jens Axboe
#5 lore raw
In reply to [email protected]
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

So you need to compile the kernel with UDF support , which is the filesystem used in DVDs. As you said, iso9660 works, but only for

the

Quoted 7 lines
Quoted 6 lines
Quoted 2 lines

first 650 mb. And after it take a look at www.linuxvideo.org and www.videolan.org.

Won´t work. UDF is a fs of its own. I think there´s something wrong with ide
(DVD or controller or BIOS ) which reports wrong device size ...

Quoted 5 lines

I tried Kernel 2.4.0, this one is also working fine. Than I used the same .config for the 2.4.1 Kernel.
And the DVD did't work!!
Maybe a bug in the CD-Rom driver?
I think I will try the 2.4.2 Kernel.

The problem seems to be fixed in 2.4.2.

Christian