Skip to contentSkip to conversation

Failover connection question

LARTC [email protected] 1 participant 1 message Jan 23, 2003

lore
Share & tools
lore
#0 lore raw

As I understood you have two connections and one is not used until the second comes down?
If yes try to add script to cron which chekcs if connection is up (ping your's provider router) and if it's down simply it shoud up the second interface and add new default route :
ifconfig ......
route del default
route add default .......
Is it what you want ?

Quoted 1 line

I'm still trying to figure out this problem, I appreciate any

suggestions...

Quoted 2 lines

What I'd like to do is have a second default gateway path that never gets

taken unless the first one goes into the "dead" state. I have installed Julian's patch and it works great for loadballanced connections using the nexthop code, but I would like to setup the second default route to be the failover only if the first one becomes unavailable. Is this possible? How might I do this?

Quoted 6 lines

regards,
joshua
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/