relocating from flash to ram on AT91RM9200DK
I'm using a custom board that was based off of the AT91RM9200DK/EK. Right now we're booting from parallel flash using boot.bin (from Atmel), but I'd like to get rid of the need for it. I assume I can use CONFIG_SKIP_RELOCATE_UBOOT and CONFIG_SKIP_LOWLEVEL_INIT to do this.
What do I need to set TEXT_BASE to for this to work?
David Peters
Matrix Product Development, Inc.
13 North Bird Street
Sun Prairie, WI 53590
Phone: (608)268-6205
Cell: (608)235-6298
Fax: (608)834-6443
Quoted 6 lines · In message <001e01c628d0$2d5a2970$d37ba8c0@SONYLAPTOP> you wrote:
I'm using a custom board that was based off of the AT91RM9200DK/EK. Right now we're booting from parallel flash using boot.bin (from Atmel), but I'd like to get rid of the need for it. I assume I can use
CONFIG_SKIP_RELOCATE_UBOOTandCONFIG_SKIP_LOWLEVEL_INITto do this.What do I need to set
TEXT_BASEto for this to work?
This depends on your chosen memory map, i. e. base address and size of your RAM and intended location of U-Boot in it.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Open the pod bay doors, HAL." - Dave Bowman, 2001
Quoted 3 lines
This depends on your chosen memory map, i. e. base address and size of your RAM and intended location of U-Boot in it.
Assuming I'm using the AT91RM9200DK, can you provide an example of a working configuration. Shouldn't the default configuration work with CONFIG_SKIP_RELOCATE_UBOOT and CONFIG_SKIP_LOWLEVEL_INIT undefined?
Quoted 4 lines · In message <001f01c628d8$b49d4310$d37ba8c0@SONYLAPTOP> you wrote:
Assuming I'm using the AT91RM9200DK, can you provide an example of a working configuration. Shouldn't the default configuration work with
CONFIG_SKIP_RELOCATE_UBOOTandCONFIG_SKIP_LOWLEVEL_INITundefined?
Why don't you just look at the settings of all the other AT91RM9200 boards (including the AT91RM9200DK, which works fine as is)?
Best regards,
Wolfgang Denk
Signature · 4 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The inappropriate cannot be beautiful.
- Frank Lloyd Wright _The Future of Architecture_ (1953)