Network issues in 2.6
I upgraded from 2.4.22 to 2.6.5 (to test HPT374' support, which BTW, works fine).
However, I'm having serious network issues now. The NIC is a 3com 3c905B. ifconfig shows this:
eth0 Link encap:Ethernet HWaddr 00:01:03:27:81:75
inet addr:192.168.20.1 Bcast:192.168.20.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:11241 errors:0 dropped:0 overruns:0 frame:0
TX packets:9739 errors:0 dropped:0 overruns:0 carrier:9732
collisions:0 txqueuelen:1000
RX bytes:2994485 (2.8 Mb) TX bytes:835146 (815.5 Kb)
Interrupt:9 Base address:0xd800Note that for TX packets, the carrier number is almost the same as the total packets.... booting in 2.4.22, there are zero problems. The only difference in the ifconfig, other than that, is that in 2.4.22, I have "RUNNING" in the options (but I didn't find how to force that).
I read the docs and tried forcing full_duplex, etc, with no success. BTW, that NIC is connected to a 10/100 switch, nothing fancy.
Quoted 15 lines · Carlos Fernandez Sanz
I upgraded from 2.4.22 to 2.6.5 (to test HPT374' support, which BTW, works fine).
However, I'm having serious network issues now. The NIC is a 3com 3c905B. ifconfig shows this:
eth0 Link encap:Ethernet HWaddr 00:01:03:27:81:75
inet addr:192.168.20.1 Bcast:192.168.20.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:11241 errors:0 dropped:0 overruns:0 frame:0 TX packets:9739 errors:0 dropped:0 overruns:0 carrier:9732 collisions:0 txqueuelen:1000 RX bytes:2994485 (2.8 Mb) TX bytes:835146 (815.5 Kb) Interrupt:9 Base address:0xd800
Quoted 4 lines
Note that for TX packets, the carrier number is almost the same as the total packets.... booting in 2.4.22, there are zero problems. The only difference in the ifconfig, other than that, is that in 2.4.22, I have "RUNNING" in the options (but I didn't find how to force that).
Hm. Thats strange. Your interface is not UP. It's not supposed to do any tx/rx at all. Try to up it. If it does not work, strace 'ifconfig eth0 up' under both kernels and compare.
Signature · 1 line
vda
Quoted 4 lines
eth0 Link encap:Ethernet HWaddr 00:01:03:27:81:75
inet addr:192.168.20.1 Bcast:192.168.20.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1
Hm. Thats strange. Your interface is not UP. It's not supposed to do any tx/rx at all. Try to up it. If it does not work, strace 'ifconfig eth0 up' under both kernels and compare.
It is UP (of course) :-)
Only "RUNNING" is missing, comparing 2.4 to 2.6. Other than that, both ifconfig output are identical (and those 'carrier' counts, obviously).
The thing is, the more I research the more it looks like a local problem, as I don't find a lot of references in google, and those who are enjoying the same problem are as clueless as I am.
In article <002101c41b00$3f0f8c30$1530a8c0@HUSH>,
Quoted 15 lines · Carlos Fernandez Sanz
I upgraded from 2.4.22 to 2.6.5 (to test HPT374' support, which BTW, works fine).
However, I'm having serious network issues now. The NIC is a 3com 3c905B. ifconfig shows this:
eth0 Link encap:Ethernet HWaddr 00:01:03:27:81:75
inet addr:192.168.20.1 Bcast:192.168.20.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:11241 errors:0 dropped:0 overruns:0 frame:0 TX packets:9739 errors:0 dropped:0 overruns:0 carrier:9732 collisions:0 txqueuelen:1000 RX bytes:2994485 (2.8 Mb) TX bytes:835146 (815.5 Kb) Interrupt:9 Base address:0xd800
Quoted 4 lines
Note that for TX packets, the carrier number is almost the same as the total packets.... booting in 2.4.22, there are zero problems. The only difference in the ifconfig, other than that, is that in 2.4.22, I have "RUNNING" in the options (but I didn't find how to force that).
Have you tried upgrading your 'ifconfig' ?
Mike.
Quoted 1 line
Quoted 1 line
Note that for TX packets, the carrier number is almost the same as the
total
Quoted 1 line
Quoted 1 line
packets.... booting in 2.4.22, there are zero problems. The only
difference
Quoted 1 line
Quoted 1 line
in the ifconfig, other than that, is that in 2.4.22, I have "RUNNING" in
the
Quoted 3 lines
Quoted 1 line
options (but I didn't find how to force that).
Have you tried upgrading your 'ifconfig' ?
net-tools 1.60
ifconfig 1.42 (2001-04-13)
Didn't find a newer one, but still, the problem's cause gotta be somewhere else.
Or not?